New to the board
Arm chair racerNew to the board
I pulled my head apart the other day to change the valve stem seals,the trike 1982 110 only had one small green seal inside a metal cover on the exhaust valve,with nothing on the inlet valve apart from the guide tapers down to a pointed top.
I've checked the service manuel that I downloaded from a few posts down and this only shows a seal on the inlet valve ??
Is this a Honda typing error ? or do they have a rubber push on type seal as I have nothing in my top end gasket set.
Thanks Brian
Power User
The day begins with 3WW
that's how it runs. no seal on that side. kinda strange eh?
________________
I'm just a squirrel "Trying" to get a nut!
Nearly every kind of Honda ATC (plus some custom ones
several Yami Quads (mostly custom built for MX racing)
https://www.mikesatvfix.com
"Freedom is not free...but the U.S. Marine Corps will pay most of your share."
At The Back Of The Pack
Arm chair racerFirst time rider
Yeah that is really strange. I was like 'huh' the first time I did that.
1978 ATC 90
2001 400EX
Got The Holeshot
Arm chair racerJust too addicted
I think the vesrah kits come with the seals.
quiet people seem intelligent
New to the board
Arm chair racerNew to the board
New seal on the exhaust, still smoking so will try the rings if I can get the barrel off without wreaking it ! Should run better now after finding a siezed advance mech on the cam, rather loose cam chain,and half a ton of rust in the carb filter amongst other things.................
Reply With Quote