//ArrowChat Code
Results 1 to 14 of 14

Thread: Any way to repair this?

  1. #1
    Join Date
    Dec 2004
    Location
    Pa.'s Highest City
    --
    8,058

    Any way to repair this?

    I discovered a hole in one of my radiator hoses for this tri z I'm building. It's not all the way through yet but it's real close.

    Is there anyway to repair this? I don't think I'd feel comfortable going out on the trail knowing this was like this.

    These pics suck but it's the best I can do at the moment. I cannot afford OEM even if it was available so if it cannot be repainred somehow what size is the hose and where can I get something similiar? This is the hose on the right side of the motor behind the water pump that connects to the head.

    Ya think some hi temp silicone would hold?
    Attached Thumbnails Attached Thumbnails tri z restore 474.jpg   tri z restore 473.jpg  

  2. #2
    Join Date
    Mar 2006
    Location
    Oregon
    --
    2,471
    that hose is around $10 bucks .... just order it !

    i had to order 1 my self ...

  3. #3
    Join Date
    Dec 2004
    Location
    Pa.'s Highest City
    --
    8,058
    $10??? where the heck you ordering from? Bikebandit has it listed for $18. Then you gott pay shipping on top of that. Did I mention I was broke?

  4. #4
    Join Date
    Sep 2005
    Location
    FL
    --
    855
    Maybe you could cut the bad spot out & splice in some sort of metal fitting with barbs on it. Might not look the best but it should work.
    "In a society that tries to standardize thinking, individuality is not highly prized." -
    -- Alex grey



  5. #5
    Join Date
    Mar 2006
    Location
    Oregon
    --
    2,471
    go collect some can's ... Cardboard what ever you need to do , to get the Funds

    I'll look for the site ....

  6. #6
    Join Date
    Nov 2003
    Location
    Newfoundland
    --
    5,280
    Just buy a joiner and cut it on the same spot of the gouge.

  7. #7
    Join Date
    Nov 2003
    Location
    Newfoundland
    --
    5,280
    Or use one of Ronnie's inline coolers.

  8. #8
    Join Date
    Dec 2004
    Location
    Pa.'s Highest City
    --
    8,058

    didn't think of that BGM..

    Hmm.. I got one of ronnie's inline coolers. But that's on the hose right next to this one. (the one that goes from the waterpump to the radiator) Does it matter which hose the cooler goes on?

    This maybe the simple (and cheap) solution i was looking for!

  9. #9
    Billy Golightly's Avatar
    Billy Golightly is offline Always finding new and exciting ways to not give a hoot in hell Catch me if you can
    Join Date
    Sep 2002
    Location
    Live Oak, FL
    --
    15,068
    Blog Entries
    14
    I think those hoses are discontinued, I know some of the 250R ones are. That being said, I'm running one on my flat tracker that has nothing but the cord holding it in the one place. If it were me Chris I'd just run it until you could afford a replacement.

  10. #10
    crackshot's Avatar
    crackshot is offline Worthless, would be a vast improvement. Arm chair racerJust too addicted
    Join Date
    Sep 2004
    Location
    Idaho
    --
    1,024
    why can't you get a hunk o heater hose at auto parts store and install?
    1980 110
    1982 250R
    1985 200s
    1985 250R
    1985 350X
    Parting out...
    1983 250R
    1984 185s
    PM me for parts



  11. #11
    Join Date
    Mar 2006
    Location
    Oregon
    --
    2,471

    Thumbs up

    Yeah $1.00 Per Foot ...

    I know you could find 4 quarter's under the sofa ...


    .................................................. ..............


    What About - DUCT TAPE

  12. #12
    Join Date
    Mar 2005
    Location
    ma
    --
    988
    chris, is that the hose that i sent with the engine? i didn't notice it. it doesn't look that bad, but you have some crappy pics! i think your overly cautious! lol

    how about the hose from the yz250? don't they use about the same parts?

    or just cut it and put a piece of aluminum tubing in it and put on 2 hose clamps.
    Billet Triz 250 parts, Case Savers, Engine Mounts, Boost Bottles, Oil Caps, and Shifters, pm me for info

    Shock Rebuilding, PM me for details TRI-Z Shocks rebuilt too



    My Feedback
    http://www.3wheelerworld.com/showthr...k-for-sblt500r

  13. #13
    Join Date
    Dec 2004
    Location
    Pa.'s Highest City
    --
    8,058
    Quote Originally Posted by ceaserthethird View Post
    Yeah $1.00 Per Foot ...

    I know you could find 4 quarter's under the sofa ...


    .................................................. ..............


    What About - DUCT TAPE
    I'm not sure if the mexican chrome will hold up to long!

    Yeah shawn.. that's the same hose. I think I did that when i put the motor in the frame. It ain't leakin yet.. but I'm not sure how long it's gonna last.

    Not sure if a yz one will fit. Can I use the inline cooler that I already have without any problems? If not I know what those little pipe connector thingies are you guys are talkin bout. I'll see if I can find one of those some place.

  14. #14
    70ATC90's Avatar
    70ATC90 is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Nov 2006
    Location
    Minnesota
    --
    235
    Yeah just buy a new one if they're only 10 bucks.
    1978 ATC 90
    2001 400EX



//ArrowChat Integreation Code //