Results 1 to 4 of 4

Thread: 250r atc foot peg measurement

  1. #1
    jadleybray's Avatar
    jadleybray is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Mar 2007
    Location
    oregon
    --
    352

    250r atc foot peg measurement

    could somebody run out to the garage and measure the length from the front bolt hole to the foot peg, center to center. thanks. repositioned pegs but didn't measure my stockers before i sold em.
    Last edited by jadleybray; 01-19-2008 at 02:13 AM.

  2. #2
    jadleybray's Avatar
    jadleybray is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Mar 2007
    Location
    oregon
    --
    352
    please...

  3. #3
    Join Date
    Oct 2003
    Location
    Las Vegas, NV.
    --
    2,531
    If I understand the desired measurement correctly, it is 1 5/8" from the center of the forward footpeg mounting bolt to the center of the footpeg. I was looking straight down from above the footpegs when I took the measurments. Both the left & right sides are the same distance. If that's not the measurement you need, let me know.
    Red Rider's Sand Machine Updated 07/23/14

  4. #4
    jadleybray's Avatar
    jadleybray is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Mar 2007
    Location
    oregon
    --
    352
    thank you much

//ArrowChat Integreation Code //