hey guys need help.. the diagram that i have doesnt show which springs go in first ...there are 3 on the front forks but im not sure how they go it been a while since i took it apart thx...
At The Back Of The Pack
Arm chair racerAt the back of the pack
hey guys need help.. the diagram that i have doesnt show which springs go in first ...there are 3 on the front forks but im not sure how they go it been a while since i took it apart thx...
Power User
Roostin Away
it usually goes largest, medium, small. Thats atleast how my 200x forks work
1986 200x- old school D.I.D wheels, Gold D.I.D X-Ring Chain, Rad MFG. Carrier, PRM Grab Bar, Pro Circuit T-4 custom, Maier plastics, 85x forks, 18x10.5x8 kenda klaw mxr's on itp steels, the money pit never ends
2004 YFZ450 - CP 12.5:1, cam mod , gibson nerfs, hmf pipe, protaper bars + risers, dg bumper/skids, holeshot gncc's on itps, cycra handguard and more stuff to come.
At The Back Of The Pack
Arm chair racerAt the back of the pack
thats what i thought but i haveing problems get the bottom seal in so it makes me think im doing something wrong..
At The Back Of The Pack
Arm chair racerAt the back of the pack
it goes metal seal first the seal then washer then lock ring then last is the top seal right??? i cant seam to get the lock ring in do i have the right order???and is 2 ozs of oil in each right???thznks for the help???
Loves Corn.
Catch me if you can
this should help ya ... the top seal has to be driven in cast the clip groove
At The Back Of The Pack
Arm chair racerAt the back of the pack
okay ive tried both ways and still nothing...i cant get the seal below the ring grove... and already think the seal is going to be shot...help i did what the picture shows but that firts metal ring is stoping it from getting low enough///i about ready to leave out the metal washer so it works....help
Loves Corn.
Catch me if you can
are you useing a seal driver... its nessary to have one to drive it in...you can make one if you find a pice of pipe that will slide over the fork tube and fits in the tube
At The Back Of The Pack
Arm chair racerAt the back of the pack
i did but i was worried about strewing up the seal buy hitting the top of it...i just was trying to make sure that i didnt do anything wrong...by the way does it make it any better or worst to put the spring different by switching them??? ive read that some people put a piece of pvc(ithink) TO REPLACE the little spring...thanks again
Reply With Quote