Heaps of grab bars available on ebay to suit TRX's but none for ATC. The TRX's are listed as 2 different types, early models and late. Does anybody know what model (if any) fit, or go close to fitting with minor mods, my 86 ATC250R.
Thanks, Brett
New to the board
Arm chair racerNew to the board
What grab bar fits 86 ATC250R????
Heaps of grab bars available on ebay to suit TRX's but none for ATC. The TRX's are listed as 2 different types, early models and late. Does anybody know what model (if any) fit, or go close to fitting with minor mods, my 86 ATC250R.
Thanks, Brett
Bretto
Power User
Teaching quads a lesson
86/87 ones are a close fit, dg and prm makes grab bars for all trikes, they are easy to get.
Testicles between my toes at the devils backbone
Teaching quads a lesson
I heard 400EX grab bars fit also..not sure.
TF 07,08,09,10,11,12,13,14!
Raffa's IceFest 08, 09, 10,11,13!
SAY IT!!!!!BUD LIGHTS AND RED LIGHTS!!!!!!
Power User
Roostin Away
400ex's dont have grab bars, at least not the 2002's. they have a rear subframe with a built in grab barOriginally Posted by hondaatc185S200E
"Instruction manuals are nothing more than another man's opinion."
- Chick McGee
-1985 250sx
- 1986 atc310R drag bike
- 1981 110 chopper.
- 1985 350X 3+1 durablue axle, uni filter
- 1985/6 350x
- 2-84 atc250r's and 1 83
- 2002 trx400ex
- 1985 atc 250r
-1985 atc70 WTB PARTS
- 1985 tecate
MADE IT THROUGH TRIKEFEST 04, 05, 06, 07, and 08, cant wait til 09!!
At The Back Of The Pack
Arm chair racerAt the back of the pack
Hmm, I wanna know too!
Power User
Got the holeshot
i have an 86-87 style on one of mine, the mounting holes are the same but the 2 back bolts need a spacer in between the frame and grab bar, i just used a few flat washers.
New to the board
Arm chair racerNew to the board
Thanks for the info.
BC
Bretto
Got The Holeshot
Arm chair racerJust too addicted
The PRM units are good value for $33 US.
www.prm-atv.com
Keeping 3 Wheelers Alive Downunder !
At The Back Of The Pack
Arm chair racerAt the back of the pack
Yes...the PRM grabbers are nice stuff.
I still have the same one I put on my 86R back around 1992, and it still looks good.
Just needed a bit of elbow grease.
If they are still made the same, they are good quality grab bars.
One piece at a time. Status: The Beast is Done..06-23-07
Back in the saddle again
Currently owned rides:
My sleds, and.........
1995 CBR600F3
1976 Kaw 400 triple-smoker......SOLD
1986 250R...owned since 1990
06-23-07........the R is finally done!!!
ESR pipe, Aktive reeds/CR cage, 38mm PWK, +4 Dominator
mild clean-up porting, an open K&N, CR and YZ calipers.......among other things
Reply With Quote
