Hub Swap/Modification

[Bgerk]

I'm using an 84 200es drivetrain in my Golf Cart, it has the 4/150 hubs on it. I want to have the same wheels front and rear and I'm looking for a rear hub that fits the 200es and has the 4x100 pattern. Been searching for awhile and cant find what I'm looking for. Any ideas? Suggestions?

Thanks.

[SYKO]

well welcome abourd! as for a hub with that pattern that fits that spline is a no go, 4x100 is a common golfcar/yamaha pattern, the hubs that will fit that axle are 200x/83-84 250r/250ex/300ex hubs that have a 4x110 pattern sorry bud!

[hondahaulic]

arent blaster and maybe some banshee hubs 4/100? not sure if the splines are the same but i do know some yamaha/honda hubs interchange. anybody know the stud spacing and spline pattern of tri-z hubs? sorry im not alot of help on the yamaha wheels.

[toocheaptosmoke]

I just got some cheap tires yesterday from a blaster,(supposedly) they had the wheels and hubs too. they are the 4x100 bolt pattern and the hubs slid right on my 84 R.

[hondahaulic]

so it sounds like yamaha blaster hubs will work for ya bgerk, i think some banshee hubs are the same but im not positive on that. oh and welcome to the site!

[Bgerk]

Thanks guys!

Seems there might be a couple options now....I've seen adaptors to go from the 110 pattern to the 100...I will also look into the yamaha idea also. I have an old ytm200 also but its a 3 lug hub.

I'll update as progress happens. working on the front end lift right now, once i get the height, then i can mount the Big Red engine..etc. Should get interesting.

Brian