Any body have any carb setings for this chain saw.
Started on the 4 pull.
I'm like an Original Gangsta...but a post whore instead.
The day begins with 3WW
Any body have any carb setings for this chain saw.
Started on the 4 pull.
Last edited by edog; 01-02-2008 at 09:12 AM.
My old 1985 250R http://www.flickr.com/photos/24898661@N07/show/
Feedback http://www.3wheelerworldforums.com/s...feed+back+edog
Currently trikeless
Just Too Addicted
Arm chair racerJust too addicted
hahahaha the stuff people throw out
Current Project:1978 Pontiac Phoenix 355 v8
Past Bikes: 1999 Yamaha Big bear 350, 1981 Yamaha XS 400, 1996 Yamaha yz250 1984 Honda big red, 2004 Xtreme cr107, 1999 Yamaha bear tracker, 1999 Suzuki ds80 STOLEN, 2005 Kawasaki klx110, 1986 Honda trx200sx
Daily Driver: 1990 Buick Electra Park Avenue 3.8 v6
At The Back Of The Pack
Arm chair racerAt the back of the pack
hey i have one of those eager beaver chainsaws, they are such a b!@#$ to work on casue of the throttle bar takes for ever to snap back in place, but they are good saws.
1982 yamaha rx50.
2001 murray minibike with 5hp.
fully modded goped.
250cc 4 stroke shifter kart in the process.
HELLO, my name is stickers!
Catch me if you can
What the heck where you doing at the dump?Looking for lunch?
Check my feedback before buying from me
Catch me if you can
hey edoggydog you going to start a resotration thread on the chainsaw now?
Power User
Teaching quads a lesson
He'll post up about 12 pics of each phase of rebuilding it. Also, he'll want others to post pics of their chainsaw buildups.Originally Posted by sykolincoln
I'm back in the USSR...
Got The Holeshot
Arm chair racerJust too addicted
i have the exact same saw. not that nice though!
start at 1 and a 1/2 turns out for the carb settings
just hope you don't have to pull the carb. the whole saw has to come apart to get the carb out. those damn saws have the worst design. i have 3, i know all about them!!lol
Billet Triz 250 parts, Case Savers, Engine Mounts, Boost Bottles, Oil Caps, and Shifters, pm me for info
Shock Rebuilding, PM me for details TRI-Z Shocks rebuilt too
My Feedback
http://www.3wheelerworld.com/showthr...k-for-sblt500r
I'm like an Original Gangsta...but a post whore instead.
The day begins with 3WW
MMMMMMMMmm now you got me thinking.Bore,Stroke,NOS,Turbo,lightened flywheel,20 inch bar,oversized carb,Iridiam plug,Wesico Pistion,stainless steal nut and bolt set,Titanium Pull starter,shaved head,110 octane,
My old 1985 250R http://www.flickr.com/photos/24898661@N07/show/
Feedback http://www.3wheelerworldforums.com/s...feed+back+edog
Currently trikeless
At The Back Of The Pack
Arm chair racerAt the back of the pack
haha that would be awesome, i got bored one day and put a racing carb, volecity stack and k/n air filter on my weedwaker.
1982 yamaha rx50.
2001 murray minibike with 5hp.
fully modded goped.
250cc 4 stroke shifter kart in the process.
At The Back Of The Pack
Arm chair racerFirst time rider
Whats that a chainsaw resto thread? Finely somewhere to post some pics of my dads old 2 man saws. He got these from various people and he restored them. I don't have any pics of any of the resto process but oh well. I thought I had a pic of all 3 sitting next to each other but I can't find it.
85 250 R extra bike
85 tecate 3 brothers bike
86 tecate 3 my bike
Power User
Teaching quads a lesson
You're trying to "polish a turd" I believe is the proper saying. Remember that there's no replacement for displacement. Stick a Quadzilla engine into it.MMMMMMMMmm now you got me thinking.Bore,Stroke,NOS,Turbo,lightened flywheel,20 inch bar,oversized carb,Iridiam plug,Wesico Pistion,stainless steal nut and bolt set,Titanium Pull starter,shaved head,110 octane,
I'm back in the USSR...
Just Too Addicted
Arm chair racerJust too addicted
hahaha well isnt that the definition of over kill but then again a 250 2 stroke in an atc70 isnt far off
Current Project:1978 Pontiac Phoenix 355 v8
Past Bikes: 1999 Yamaha Big bear 350, 1981 Yamaha XS 400, 1996 Yamaha yz250 1984 Honda big red, 2004 Xtreme cr107, 1999 Yamaha bear tracker, 1999 Suzuki ds80 STOLEN, 2005 Kawasaki klx110, 1986 Honda trx200sx
Daily Driver: 1990 Buick Electra Park Avenue 3.8 v6
I'm like an Original Gangsta...but a post whore instead.
The day begins with 3WW
I think a 40 inch bar would be better....don't you think?
My old 1985 250R http://www.flickr.com/photos/24898661@N07/show/
Feedback http://www.3wheelerworldforums.com/s...feed+back+edog
Currently trikeless
Power User
Roostin Away
i restored a stihl 044 about a year ago. i got it for $100 with the handle broken off behind the throttle. they must have dropped a tree on it.
those sthil 044's are a 65cc motor. the 066's are a 90cc they even make a 088 thats a 137cc
i bought a siezed parts stihl 046 was on ebay for $55. i had to dismantle about 1/2 the saw since the gas tank is biult in with the white housing around and below the throttle that was broken. with buying a new 24" bar for $30 and a couple other things i have only $200 into it.
they are a $500 chainsaw when new. it throws roost out the back about 4 feet when your cutting.
JASON LISKEY
1985 atc 250r ---- finsh line axle,.fmf exhaust and rictor privateer silencer, prm grab bar.
2008 KTM 525xc quad ----- HMF exhaust, HRE chromoly stem,
86 trx 250r --- with after market chromoly frame and everything else done to it
01 400ex --- with 86 trx 250r motor
87 250x + 93 300ex both 350x powered
2 = 86 atc 350x's
86 atc 250r
83 atc 185s --- from retired guy not ridden since 87
Bandito framed 110 with 85 motor and yellow us90 fenders + tank
At The Back Of The Pack
Arm chair racerFirst time rider
I'm restoring an old David Bradley saw right now like this one Got it from a friend years ago, Should be a neat conversation piece for the shop once its done.
I had one of those little McColluch saws before, used it for 3 years before selling it, Awesome little saws. I've been looking for another for a while now to carry on the trike since alot of the trails near me are getting run down, A deal at twice the price!
Scott
Reply With Quote