Does anybody know anu other rear shock that will bolt up with no mods? I was thinking of rebuilding my stock one but I want something a little better. Also, who makes a carb rebuild kit for the stock 34 mikuni carb?
At The Back Of The Pack
Arm chair racerAt the back of the pack
Does anybody know anu other rear shock that will bolt up with no mods? I was thinking of rebuilding my stock one but I want something a little better. Also, who makes a carb rebuild kit for the stock 34 mikuni carb?
Power User
The day begins with 3WW
I would think the 2001 Raptor 660 shock would pretty much bolt up on those as well.
Stock carb is worthless, throw it away and find a used 39mm PWK.
My Feedback 85 TECATE 500 08 Honda 450R
Power User
Got the holeshot
300ex fits on the 1984-85.
I recommend a different carb also.
86 T3
84 T3
86 KX250
Got The Holeshot
Arm chair racerJust too addicted
If you're gonna put on a 39 PWK and run the stock airbox....forget it. You'll never get the airbox boot over the intake bell of the carb. Believe me. Been there...tried that. I went with a Keihin PJ 36 that's bored to 37.5mm instead. I turned down the o.d. of the bell on a lathe just a bit so the boot would fit easier.
"You should never smoke in pajamas..
You might start a fire and burn your face..
Maybe you should return to Manaugua..
You could go un-noticed in such a place"
FZ
Ass,gas or grass....nobody rides for free!
Ride free,Brotha. See you in Heaven.
At The Back Of The Pack
Arm chair racerAt the back of the pack
thanks for the replies guys-I am not using the stock airbox. I am running an open filter sice I will only be riding it inopen fields. No trail rides on this one. I want to go straight and fast.
Loves Corn.
Catch me if you can
did some one catch a little need for speed?Originally Posted by ovhonda1
Reply With Quote