see you in the morning!
Loves Corn.
Catch me if you can
Loves Corn.
Catch me if you can
jeff.. you need anything else? any stupid grommets or anything that you can think of?
Power User
Got the holeshot
Decided to get a little more done on the tri-z this weekend. Met up with Raffa on saturday morning! Great guy no doubt. Real comforting to know that a guy that possess his knowledge about these things is only an hour a way. Currently the shock is out for rebuild by a good friend of mine. I got the dogbone powdercoated in some chrome and replaced all the bushings seals and bearings in it. All new OEM bolts as well
Hose routing from the back two outlets of the fuel pump. Does the bottom nipple hook to the bottom nipple of the tank? The top nipple hook to the top mount back by the grab bar?
HELLO, my name is stickers!
Catch me if you can
An hour away? so we'll expect to see you running this at icefest next year?its lookin schweet too!
Top to top bottom to bottom I think. I did a write up about it here and .org with alot of pics,, along with the whole fuel pump nitemare..good luck with that!
Power User
Got the holeshot
HELL YES Chris...
I was searching thru your posts a minute ago. You asked alot of the same questions I have just in many multiple threads. I am still looking.
BTW........Fuel pump brand spanking new... stole it on ebay for 40 bucks BIN one morning
Twinkle Toes
The day begins with 3WW
Lookin good, so just about everything on the Z will be new right? Looks like a new gas cap even
Where did you find the rubber grommets for the air box cover? are they still available OEM?
How much do you figure you'll have into it?
Last edited by Tri-ZNate; 05-05-2008 at 12:29 AM.
Nate
The Myth, The MAN, The Legend
R.I.P HRR
Originally Posted by honda250sx
HELLO, my name is stickers!
Catch me if you can
The local hardare store has those grommets nate.. Heck I still got abunch of them if your lazy...
Twinkle Toes
The day begins with 3WW
Sounds good chris, Maybe next ride I''l bring the beer
Nate
The Myth, The MAN, The Legend
R.I.P HRR
Loves Corn.
Catch me if you can
eather way it will run ,,just the switch on the pump will be backwards..
wish I could have hung out longer ,,but two 5yr olds in the back seat..I was getting stressed.. got too Gplarrys friends house and there was a playground across the street... thank god..
can you get them air cover wing nuts new? if ya can grab me a couple please...I never tryed to get them...
Last edited by Bryan Raffa; 05-05-2008 at 07:08 AM.
Power User
Got the holeshot
Wheelipop - Gromets are still available. I have extra's if need be. And access to alot more. Many yamaha's use these. Gas cap is old as the trike. Little white paint pen and a steady hand and yours can look like that too. Numbers on how much I have in it... Lots of receipts no time to tally. Not sure if i want too lol.
Bryan - Microfiche reader in my basement and i still dont think to look at it
Power User
Got the holeshot
According to the Man, B.Raffa.... Bottom of the tank fitting to top fitting on pump (RES)....Side tank fitting to bottom fitting on pump (ON) Correct???
Pump output to T-Fitting to on/off petcock... Out of petcock to PWK39mm...?
Out of brass fitting to vac. port on cylinder...?
T-fitting to large fitting on tank to return fuel...?
Also is this where you guys mount some fuel line to protect kicker and the footpeg? Just trying to gather all the info learned from searching threads and apply all this to one thread so I don't have a million threads on one trike
Twinkle Toes
The day begins with 3WW
thats new to me.
Nate
The Myth, The MAN, The Legend
R.I.P HRR
Loves Corn.
Catch me if you can
kick start hits on the front of the peg..not the back and it will slice that gasline like butter..
and thats a banshee rear resv....
Pump output to T-Fitting to on/off petcock... Out of petcock to PWK39mm...?
Out of brass fitting to vac. port on cylinder...?
T-fitting to large fitting on tank to return fuel...?
YES YOU GOT IT!
that motion pro gas line is great stuff.. stays flexable a long time..
Last edited by Bryan Raffa; 05-06-2008 at 07:19 AM.
Power User
Got the holeshot
Ah okay. So what do you put some hose on the kicker itself? I remember you talking about it in another thread somewhere.
Yes brand new banshee rear resi with the other mount machined off
Yes the tygon motion pro fuel line is amazing stuff. No one wants to buy it for its price. I just pull it off a 100ft spool hahahaha.
Loves Corn.
Catch me if you can
ya right on the kicker.. when it gets chewed up I just replace it..
Reply With Quote
