Results 1 to 3 of 3

Thread: Neutral switch on a BIGRED?

  1. #1
    Join Date
    May 2002
    --
    610

    Neutral switch on a BIGRED?

    BIGRED was shut off and would not re-start last night. No fire, I think the switch that tells the trike that it is in neatral is to blame. Does anyone here know how to check it or replace it? I don't get the neutral light and the starter solenoid won't go clack when you press start. Any help would be appreciated.
    Sam from Florida
    1985 BIGRED $ 200X

  2. #2
    Join Date
    May 2002
    --
    610
    Well I figured out where it all was, turns out that both the neutral and reverse switch wires pulled off their terminals. Usually the simplist explanation is the right one .
    Sam from Florida
    1985 BIGRED $ 200X

  3. #3
    Mike Fort Laud's Avatar
    Mike Fort Laud is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Feb 2002
    --
    386
    HA HA, And you had to pull it all the way home because of a couple of wires. I think you need to ask Marie to settle down and not ride the bike to hard. She must have been screwing around with it until she broke it...... Oh yea and the 4-HI works great....Later
    I would rather have a sister in a whorehouse,than a brother with a quad!!!!!!!!!!!!!!!!!!!!!! Still walking the "Tightrope"

//ArrowChat Integreation Code //