First Time Rider
Arm chair racerNew to the board
Of couse it always happens this way getting ready for OK on wensday and my 250r is missing at the topend checked every thing and the coil is going. What other honda coil will fit so I can get it going this weekend to make sure all it well? It is a 1985 250r specs in the sig.
Thanks
------------------------------------------------------------------------
There is Nothing too nice to be hot rodded
85 250r (On going build up and rebuild) Ported Cylinder, 36mm carb, New Crank, Rod and Piston FMF Exhaust (for now)
04 400ex, Duncan Racing Exhaust (,wifes)
80 Z-28 (5 year + 10 to 1, Full Roller 427 + .060 (440) build up ) 475 hp at the rear wheels running 7.22 1/8s on old slicks.
Power User
Got the holeshot
I have used coils from other bikes before, i recall using a 200sx, and a 250sx. I think most all of them will work, although they didnt seem to last very long. Could have been coincidence and maybee were going out anyway. But like i said most all of them will work in a pinch.
First Time Rider
Arm chair racerNew to the board
Well over noon I tried a universal coil the honda dealership had and it looks better but I didn't have time to ride it over noon. How common is it for a stator to partially fail?
Last edited by 80'427; 09-07-2007 at 03:04 PM.
------------------------------------------------------------------------
There is Nothing too nice to be hot rodded
85 250r (On going build up and rebuild) Ported Cylinder, 36mm carb, New Crank, Rod and Piston FMF Exhaust (for now)
04 400ex, Duncan Racing Exhaust (,wifes)
80 Z-28 (5 year + 10 to 1, Full Roller 427 + .060 (440) build up ) 475 hp at the rear wheels running 7.22 1/8s on old slicks.
Reply With Quote