Is it possible to reinstall the kickstart shaft into a 350x without taking the clutch off? The decompression cam broke and i replaced it now i cant get the kickstart shaft back in right. Matt
New to the board
Arm chair racerNew to the board
Is it possible to reinstall the kickstart shaft into a 350x without taking the clutch off? The decompression cam broke and i replaced it now i cant get the kickstart shaft back in right. Matt
Got The Holeshot
Arm chair racerJust too addicted
Welcome!!
good question.. you have the manual? let us know what you figure out - either way
BTW - Welcome to the boards!!!
quiet people seem intelligent
New to the board
Arm chair racerNew to the board
I do have the manual and it says take it off. As much time i spent messin with it i could have already takin the clutch off.
At The Back Of The Pack
Arm chair racerFirst time rider
Welcome to the glorious and frustrating world of vintage rides. My buddy is going through kick starter hell on his 85 350X right now.
79 ATC 70 (Youngest Son's eventually)
83 ALT 50 (My youngest Son's)
85 ATC 70 (My Eldest Son's)
85 ATC 250SX (The Wifes)
85 TRI Z 250 (Mine)
85 ATC 350X (Mine)
93 KDX 250 SR (Mine Asian spec)
97 RM 125 (The Wife's)
02 ZXI 1100 Jet Ski (The Fam's)
03 BUELL Blast (The Wife's)
12 FXDWG103 (ALL MINE)
Power User
Catch me if you can
That shaft has to be tipped to the right and turned 90 degrees or so so the latch gets behind the catch before it can go in completely. So... I'd say no it cannot but I don't have one in front of me this second to verify that....
All our government does is distract us while they steal from us, misspend our tax $ and ruin our country
Reply With Quote