New to the board
Arm chair racerNew to the board
Hey guys. I am trying to figure out what to do for some rear brakes on my 85 200x. I have 2 rear calipers and 3 master cylinders. None of them work. They all have rust dust in them. I tried cleaning them out but can't seem to get them to work. Has anyone rebuilt these, or do you just have to buy new, or used working. I don't want to spend hundreds of dollars. can I just disassemble and clean everything? Any suggestions on a cheap fix?
83 Honda ATC250r
87 TRX 250x with ATC 350x motor
98 Polaris Trail Blazer 250
89 Kawasaki KLR 250
99 Yamaha WR400F
Power User
The day begins with 3WW
i got a non working one for 10 bucks that needs rebuilt. they do make rebuild kits. the working ones on ebay go for alot. i sold a working mastercyclinder on here awhile back for $55.
nothing else is a bolt on, so your stuck.
Got The Holeshot
Arm chair racerJust too addicted
there are some new calipers on ebay, but their $100, i have never heard of rebuild kits for the 83-85s, but they have them for the 86-87s, but there may be some for the 83-85s, and see this for the caliper swaps.
My Rides
1983 ATC200 - U-Haul edition - great mudder - SOLD
1984 ATC200X - sucked a valve - frame up resto & engine rebuild with performance parts in the works
1987 Suzuki DR200
199? Go-ped Sport
Power User
Catch me if you can
Very easy to rebuild and about 20$ in parts to do it. AS LONG AS the slide pins aren't all seized up etc etc. Another 30$ for good pads...
Do a search and you'll find tons of info on rebuilding brakes unless you have a specific question....
All our government does is distract us while they steal from us, misspend our tax $ and ruin our country
Power User
Roostin Away
just get a front caliper from a 2000 or newer cr80 just switch it over to the 200x rear caliper bracket. it bolts rite on.
i did a thread about it in the mad scientist section
JASON LISKEY
1985 atc 250r ---- finsh line axle,.fmf exhaust and rictor privateer silencer, prm grab bar.
2008 KTM 525xc quad ----- HMF exhaust, HRE chromoly stem,
86 trx 250r --- with after market chromoly frame and everything else done to it
01 400ex --- with 86 trx 250r motor
87 250x + 93 300ex both 350x powered
2 = 86 atc 350x's
86 atc 250r
83 atc 185s --- from retired guy not ridden since 87
Bandito framed 110 with 85 motor and yellow us90 fenders + tank
Reply With Quote