I'm considering selling my Selvy's 200R kit

[Dirtcrasher]

I'm sure there are threads on this but that whole cylinder is different? And has a different stroked crank? along with the custom pipe and silencer. The cases are stock or some material is removed for the piston skirt?

Is that the gist of a SELVY kit?

[Billy Golightly]

From what I understand, the process was de-stroking the crankshaft (because the 250R already has a under-square design and even less bore just wouldn't work out as well) and then they cut the bottom of the cylinder to compensate for the decrease in stroke throw. The bubble on the exhaust side of the cylinder, appears to me, to be a modification to allow it to have a triple exhaust port setup instead of just the normal single bridged type. Allows more exhaust to flow out quicker

[NINJA]

Actually Billy, they they cut down the top of the cylinder and reworked the ports.

[NINJA]

See how the head doesn't match perfectly with the cylinder anymore? See in the second pic how the waterneck had to be moved down and rewelded?

[Kintore]

Sell it and get a 265 PV kit, its AWESOME! I ride the piss outa it and she loves it! like it was said, whats the point in owning something you dont wana ride?

[freaksfix]

id be interested in the pipe maybe the carb (how big)... i have an 85R with a nasty selvy's port job and selvy's silencer.. the carb is different but it dont say selvy's on it.. hit me up with a pm.. freaks

[NINJA]

Sell it and get a 265 PV kit, its AWESOME! I ride the piss outa it and she loves it! like it was said, whats the point in owning something you dont wana ride?

That's exactly what I want to get Kintore. Approximately how much does that kit cost? Give me a little more input on it too.

[NINJA]

I'm not seperating the kit, sorry Freaks. It's gonna be the whole shebang or not at all.

[Kintore]

I bought this motor-

http://cgi.ebay.com/ebaymotors/ws/eB...MEWA:IT&ih=012

I got a STEAL on it, as far as Im concered
Hinson basket
PC 2000 fully ported MX cylinder
New top and bottom end with less than 30 on top and 5 on bottom
2 cool heads
Paul Turner Pyramid reeds and cage
17-19 cc domes
Polished cases

I love this thing, espically for MX its intense. I can now cut a corner and pull out almost if not the same as a 4 stroke. The top end is phenomial as well, pretty much takes the "hit" away and adds a smooth controllable powerband. I found the top end is awesome as well, pretty much has awesome power all over the board to say the least.

PC 2000 PV cylinders are pricey, the motor I worked out is about 3500ish if not more. The PC setup is just around 1500 itself, not including any other work either.

I got a full paul turner motor now, pipe, carb, reeds, top and bottom end... and it hauls dude.

GET ONE!

[NINJA]

Damn dude, I'm so jealous! I've had a crush on your trike for a while now anyway, this just makes it worse!

[Kintore]

Wait till you see when im DONE with it!

pitching a tent material dude, im serious...