after 2 years of work i have designed it and built it still a few things to sort out. ie. the engine stalls without the choke and i have to slide the engine over .5' so that the chain don't rub.
New to the board
Arm chair racerNew to the board
after 2 years of work i have designed it and built it still a few things to sort out. ie. the engine stalls without the choke and i have to slide the engine over .5' so that the chain don't rub.
Got The Holeshot
Arm chair racerJust too addicted
That looks pretty cool. Did you build it from the ground up? What size engine is that?
Kindergarden Speller
4 Wheels? Huh?
thats pretty cool man. good job building that bad boy up.
down to parts because i no longer have a place to ride trikes.
GIT IT RAAAGGGGG !!!!
New to the board
Arm chair racerNew to the board
yes it is mostly from the ground up. and the engine is a 270cc's.
Just Too Addicted
Arm chair racerJust too addicted
nice man good job
86-tecate
Power User
Teaching quads a lesson
Pretty beastly. Does it use a CVT tranny, or is it a single speed?
I'm back in the USSR...
New to the board
Arm chair racerNew to the board
it is unfortunatly single speed but when given the space to get going it will move.
New to the board
Arm chair racerNew to the board
and on top of that i have descoverd that the clutch box has a leak and was run with no oil. plus i have to cut out part of the frame and find a welder again to strengthen it again(the chain is hiting it)
Check my feedback before buying from me
Catch me if you can
hey thats all part of making something yourself man!! it may take some extra work, but knowing you built this yourself is a accomplishment in itself!!!
New to the board
Arm chair racerNew to the board
i agree with that however the only hitch is that i don't have a welder that works any more. but i do have more clutch parts
New to the board
Arm chair racerNew to the board
it took me 5 hours to make the nesasry modifications to the frame and get the clutch repaired. but the frame is only bolted in one spot untill i get to my buddys house to weld it permanatly. now i just need to get the carb working proprly.
Reply With Quote