Got The Holeshot
Arm chair racerJust too addicted
Just bought a 1987 Suzuki DR200 dirtbike.dont know anything about it except its a 200cc 4 stroke and dont know if it runs or not but im pretty sure it just needs the carb cleaned and it will fire up. anything i should be aware of on these dr200s, any tips, or any help at all will be appreciated. do they still make parts? i looked on ebay and only like 80 things came up. sorry, no pics as my camera is broke. but this is what it looks like. thanks.
Last edited by 3Wheelers4Life; 04-17-2008 at 08:03 PM.
My Rides
1983 ATC200 - U-Haul edition - great mudder - SOLD
1984 ATC200X - sucked a valve - frame up resto & engine rebuild with performance parts in the works
1987 Suzuki DR200
199? Go-ped Sport
At The Back Of The Pack
Arm chair racerAt the back of the pack
there good bikes i had a suzuki sp200 the same bike as the dr i still have the engine, if u need it or parts let me kno tim.
1982 yamaha rx50.
2001 murray minibike with 5hp.
fully modded goped.
250cc 4 stroke shifter kart in the process.
Got The Holeshot
Arm chair racerJust too addicted
finally got it running.
thanks, ill keep you in mind.Originally Posted by DarkestGKnight
My Rides
1983 ATC200 - U-Haul edition - great mudder - SOLD
1984 ATC200X - sucked a valve - frame up resto & engine rebuild with performance parts in the works
1987 Suzuki DR200
199? Go-ped Sport
At The Back Of The Pack
Arm chair racerAt the back of the pack
good to hear it runs strong, good luck with it. tim
1982 yamaha rx50.
2001 murray minibike with 5hp.
fully modded goped.
250cc 4 stroke shifter kart in the process.
Got The Holeshot
Arm chair racerJust too addicted
thanks, took it up the road yesterday, no 1st gear. broke headlight, missing taillight, and missing left side rear plastic. would you happen to know any specs on the bike, or any info? heres some pics from the auction:
My Rides
1983 ATC200 - U-Haul edition - great mudder - SOLD
1984 ATC200X - sucked a valve - frame up resto & engine rebuild with performance parts in the works
1987 Suzuki DR200
199? Go-ped Sport
At The Back Of The Pack
Arm chair racerAt the back of the pack
the only specs i can find were for the sp200 same bike and every part fits the dr200. heres the link, http://www.suzukicycles.org/SP-serie...rochures.shtml also i belive the bikes top out around 70-80 mine got up there but my speedo was broke lol, i have that same exhaust sitting in my garage to, was kinda loud when u reved it. but you can get some cheap stock parts from bikebandit.com or naturecoastmotorsports.com. tim
1982 yamaha rx50.
2001 murray minibike with 5hp.
fully modded goped.
250cc 4 stroke shifter kart in the process.
Got The Holeshot
Arm chair racerJust too addicted
tops out around 70-80 huh, cool. my exhaust was clogged with rust, so i had to cut off the end and gut some of the internals. i looked around and did not see any aftermarket parts for it, besides basics (clutches, sprockets, etc.). does anyone make aftermarket parts? also is it normal that the muffler is suppose to touch the side plastic? thanks for your help DarkestGKnight!
My Rides
1983 ATC200 - U-Haul edition - great mudder - SOLD
1984 ATC200X - sucked a valve - frame up resto & engine rebuild with performance parts in the works
1987 Suzuki DR200
199? Go-ped Sport
At The Back Of The Pack
Arm chair racerAt the back of the pack
no problem yeah dont know if you got your bike that high i read it on a specs sheet and a guy i knew said his did 80 on his speedo, also no sure on aftermarket parts i know alot of exhaust fits, get a new slip on. other then that not sure what you can do with a dr mine was stock. check some local dealers for maybe some parts. good luck
1982 yamaha rx50.
2001 murray minibike with 5hp.
fully modded goped.
250cc 4 stroke shifter kart in the process.
First Time Rider
Arm chair racerNew to the board
i had an sp200 also. same bike as the dr200 street legal version. yours looks different drom the street sp and dr. looks to be the same motor though.
Got The Holeshot
Arm chair racerJust too addicted
Its now for sale
Last edited by 3Wheelers4Life; 04-17-2008 at 08:04 PM.
My Rides
1983 ATC200 - U-Haul edition - great mudder - SOLD
1984 ATC200X - sucked a valve - frame up resto & engine rebuild with performance parts in the works
1987 Suzuki DR200
199? Go-ped Sport
Registered User
New to the board
hey i know this is an old thread but if any of you need service manuals or specs just let me know i can scan pages from my 86 dr200j service manual and post them also if anyone has any parts they would like to sell for the dr200 let me know
Reply With Quote
