Results 1 to 15 of 15

Thread: New on forum / Atc500x

  1. #1
    Join Date
    Dec 2007
    Location
    Quebec,Canada
    --
    1,014

    New on forum / Atc500x

    Hi!

    I'm new on this forum.I'm in quebec.I have a lot of parts for 83-85 200x.Tecate engine,250es.I have now a 1985 atc250sx and my last one is a atc500x,(modified 350x).I bought the 350x without engine,swingarm,rusted gas tank,broken fender,worn seat...I have rebuilt it to low cost....but a really nice result!!!I have used an engine a FT500 ascot,electric start,and installed kick start on it for backup(kickstart shaft,gear spring from an xl250)just remove the plug on the ascot cover and install the seal and it's done.The exhaust is a suzuki bandit 1200,6 inch shortened.I modified the frame.Not so bad a 300$ bike,restoration included.
    I also install new 4-snow rear tires tonight
    I have other picture of the trike!
    I also check for tSorry for my english,not perfect,english is my second languagehe ignition pad for a 250sx,the one on my 500x isn't complete.
    Attached Thumbnails Attached Thumbnails 500Xcool.JPG   500X16.JPG   500X008cool.JPG  

  2. #2
    250rfreak's Avatar
    250rfreak is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Nov 2007
    Location
    UT
    --
    330
    welcome to the forum that is a awesome bike there are a ton of cool people on here that can help you with anything
    famous words "is it wrong to wear my helmet sitting on the toilet and twisting the toilet paper roll like its a throttle while making engine noises?"

  3. #3
    Join Date
    Oct 2007
    Location
    Grosse Tete, LA
    --
    3,440
    Your English is better than most of the people on here, and it is their first language. lol

  4. #4
    Join Date
    May 2006
    Location
    Kentucky
    --
    2,294
    Nice way to make an entrance... Sweet X man, and
    Tionesta Trikes ATC 450R
    86 250R
    86 Tecate-3
    83 ATC 70
    85 Big Red
    81 KLT 200
    85 250SX
    Tricky Dicks Cagiva WMX 200 sold
    Trikefest survivor 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20
    My feedback: http://www.3wheelerworldforums.com/s...dback+eric250r

  5. #5
    BigTBones's Avatar
    BigTBones is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Oct 2004
    Location
    Salem, Oregon
    --
    420
    First of all , Sweet X! How does she run? Have you compared it to any other bike?

  6. #6
    Join Date
    Feb 2006
    Location
    Central Florida
    --
    1,090
    holy cow..... I love the XXX - Does it feel like it needs more suspension? I looks great and I bet it runs like mad - WELCOME!!
    quiet people seem intelligent

  7. #7
    Join Date
    Aug 2007
    Location
    new brunswick canada
    --
    104
    nice trike man and welcome to the place that trikes live

  8. #8
    Join Date
    Jul 2005
    Location
    N/A
    --
    5,818
    nice 350x...welcome and i think you'll fit right in...if you like customs a few of us are insane about these thing...just check my auto-x hybrid out haha.

  9. #9
    Join Date
    Feb 2005
    Location
    Orchard Colorado
    --
    659
    Cool engine swap! I like your thinking, welcome to the site

  10. #10
    Join Date
    Dec 2007
    Location
    305
    --
    521
    so the FT500 is a 500cc?

  11. #11
    Join Date
    Apr 2006
    Location
    SE CA Dez in the sandbox
    --
    893
    Nice trike, search around there're a couple of other 500X around here on the board. Yours turned out very nice indeed.
    Have '85 350X-XR500 Hybrid,
    Had Nicholson framed: 90/110, 185s, Gen I 500, Gen II 500
    Had Bandito Framed 90
    Have Vey's Framed 90
    Have too many parts

  12. #12
    Join Date
    Apr 2004
    Location
    Brigham, Québec, Canada
    --
    1,528
    Nice conversion. Where do you live?

    1984 Yamaha YTM-225DX
    1985 Tri-Z 1985 Tecate 1984 Tri-Zinger and 1986 ATC250R projects
    Yamaha 3-wheeler owners club Join now!
    Official 3WW Yamaha 3-wheeler owners group
    Québec 3-wheeler riders group

  13. #13
    Join Date
    Dec 2007
    Location
    Quebec,Canada
    --
    1,014

    .

    I'm in St-albert,near victoriaville,Quebec Canada
    The suspension feel good,the real 350x probably feel better for race,but for snow trail the 500 have a loooooot more torque,electric start.....paradise
    I have not tested with other bike,but it's very fast
    If a found another rolling frame I will install my spare Cr500 engine in it

  14. #14
    Join Date
    Apr 2006
    Location
    PA
    --
    1,464
    Looks really good! I bet it hauls around alot better than a stock 350 engine. And ! Im sure any questions you need answered can be found here.
    1986 200x- old school D.I.D wheels, Gold D.I.D X-Ring Chain, Rad MFG. Carrier, PRM Grab Bar, Pro Circuit T-4 custom, Maier plastics, 85x forks, 18x10.5x8 kenda klaw mxr's on itp steels, the money pit never ends

    2004 YFZ450 - CP 12.5:1, cam mod , gibson nerfs, hmf pipe, protaper bars + risers, dg bumper/skids, holeshot gncc's on itps, cycra handguard and more stuff to come.

  15. #15
    Join Date
    Feb 2006
    Location
    Central Florida
    --
    1,090
    KOOOOL - I am glad to hear the extra weight didn't kill the suspension.
    quiet people seem intelligent

//ArrowChat Integreation Code //