Power User
The day begins with 3WW
What rear calipers FOR SURE swap with the 1986 350x? Please no guessing. I have the 1986 mounting bracket. Just need to find a cheap caliper that isn't frozen all to hell.
This bike is inching it's way towards the chopping block. Getting really, really sick of fighting with issues around every corner.
Power User
Catch me if you can
It's zero outside, I'm not gonna go try it.... You don't want a guess but I'm confident the 83-85 200X rears all fit as does the 86-87 200X and the 85 350X too. But you don't want a guess so I'll see you in 40 more degrees.....
All our government does is distract us while they steal from us, misspend our tax $ and ruin our country
Power User
The day begins with 3WW
I'm hoping a caliper off a newer bike will work actually. Something that's had less time to rot.
Power User
Catch me if you can
Thats the thing, you can buy 6 of them and only get 1 good one and 1 that can be rebuilt. Most of the ones I bought are junk.
I realize you want NO MODS so I'm not certain what works. The YZF does with some "egging out" of a hole or something, but didn't Jason find that a CR80 front caliper worked also? Search that one, IDK if it was a direct b o or not....
All our government does is distract us while they steal from us, misspend our tax $ and ruin our country
Power User
Roostin Away
that was me that did the cr80 front caliper swap onto a 85 200x. it bolts rite up to the 200x bracket. will be the same on a 350x bracket. the cr80 even uses the same brake pads. get a caliper from a 2006 cr80 or crf150 they go cheap on ebay. i bought one for $26 for mine
the Yzf swap is for the 86250r if you get one from a 2003 or newer yz dirt bike you only have to egg the holes 2mm's. i did this swap to my 86trx250r.
JASON LISKEY
1985 atc 250r ---- finsh line axle,.fmf exhaust and rictor privateer silencer, prm grab bar.
2008 KTM 525xc quad ----- HMF exhaust, HRE chromoly stem,
86 trx 250r --- with after market chromoly frame and everything else done to it
01 400ex --- with 86 trx 250r motor
87 250x + 93 300ex both 350x powered
2 = 86 atc 350x's
86 atc 250r
83 atc 185s --- from retired guy not ridden since 87
Bandito framed 110 with 85 motor and yellow us90 fenders + tank
Power User
The day begins with 3WW
I just bought a front caliper off a 1999 CR80 Big Wheel. Looks to be an identical part to the new 80's and the crf150. I'll update this thread after I get it.
Thanks guys!
Power User
Roostin Away
Is it the front or rear caliper that interchanges? I'm figuring the rear?
Power User
The day begins with 3WW
Bike front fits the trike rear. You can look at the pic and see it's the same part with a different color paint.
Power User
Roostin Away
I'm on the hunt now for a cr80 or crf150, they are the same looks like
First Time Rider
Arm chair racerNew to the board
definitive answer you say huh? I used one off of a 2000 300ex on my 86 350X, bolts on no modification needed! hows that?
Current bikes:
85 1/2 Tri-Z (black/red)
84 T3 restored
84 T3 unrestored for gettin'
84 T3 money pit
86 350X 13.5:1 full race
84 250R beater
96 blaster CT sonic 240 kit 38mm airstryker carb 42HP!!
Past bikes:
85 TRI-Z
84 200X
87 200X
86 350X
82 250R
84 250R beater
84 TRI-MOTO 125
83 ATC 110
70 US 90
87BW 200( I know its not a trike but...)
Power User
The day begins with 3WW
on ebay they sell new ones listing them for 300ex/400ex/350x. althought the cr80 ones are smaller and look cleaner if you dont need the parking brake cable set up.
Power User
Roostin Away
Most people block the parking brake cable anyways .. a 300ex works also? hmmm now we have a couple choices to go with
Power User
Catch me if you can
Watch it be all frozen up to hell... LOL!! J/K, hope it's sweeeet!Originally Posted by Dammit!
I just bought a front caliper off a 1999 CR80 Big Wheel. Looks to be an identical part to the new 80's and the crf150. I'll update this thread after I get it.
Thanks guys!
All our government does is distract us while they steal from us, misspend our tax $ and ruin our country
Power User
The day begins with 3WW
alot of the calipers work onthe back of the atc's i have a banshee one on my 85 350x but used the 85 mount, i know a warrior and newer blaster one also work
ok here goes, 85 atc70,2 84 atc70's 83 alt50,83 atc110 , 70 us 90 parot green, 85/86 350x garage queen, stock rider 85 350x, project 85 350x 85 250r drag bike, 2 85 250sx's, alt185, , scat tracker?99blaster,85 250r rider,85 250r ice racer project ,93 kx500,99 xr200r, 91 dr250s ,89 lt500 quadzilla,88 lt250quadracer, 88 trx250r race full on race quad,, 01 yamahakodiak400, kawaki kd100,lt50 for my doughters,93 300ex, 230 quadsport, lt185, lt250 quadrunner,84200s, is that enough?
Power User
The day begins with 3WW
Got the CR80 caliper and mounted it up. It wasn't in as good of shape as I was hoping but it's better than what I had by a mile. Had to let it soak a bit to get the sliders unstuck. Still not moving like they should but it's good enough for now. Gotta bleed it and it should be good for the trike rally at least.
Just wanted to post confirmation that they do in fact bolt right up using the stock 350x mount. I should have spent a little extra and for the one off the CR125F that was on there when I got this one. It was fifteen bucks more but only a yeard old.
Reply With Quote
