Page 1 of 3 1 2 3 LastLast
Results 1 to 15 of 32

Thread: 350x help plz

  1. #1
    350xrider911 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Nov 2007
    Location
    porter texas
    --
    301

    350x help plz

    what color does oil burn im hearing blue and other time witch is it.

  2. #2
    Join Date
    Apr 2006
    Location
    Crestview, Florida
    --
    2,429
    It looks white with a blue haze and has a distinct smell.
    The person who says it cannot be done should not interrupt the person who is doing it.


    Rides
    85 ATC350X
    85 ATC200X


    My Feedback http://http://www.3wheelerworld.com/...-for-Erics350x

  3. #3
    Join Date
    Mar 2006
    Location
    PA
    --
    3,515
    blueish white and black are the only 2 colors you might see coming out of a 4 stroke
    80s......185 atc, Yamaha tri-moto 200, 85 200x with tons of work
    90s......89 Suzuki quad racer 250 (raced 250 A class for 6 years, late 90s.. custom framed 250x with long travel shocks and a built 350x motor.... built Honda 110
    00s...... chomeoly framed 350 RX with all the goodies (thanks to my bro)
    2012.....Replaced the 350x motor for a 444cc YZ426
    WWW.HREATV.COM

  4. #4
    350xrider911 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Nov 2007
    Location
    porter texas
    --
    301
    it blueish and black it smokes a little at idle then u get into it it turns blackish then when u drive it, it dont smoke but when u let of the throtle it smokes

  5. #5
    350xrider911 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Nov 2007
    Location
    porter texas
    --
    301
    what type of carb should i run i put the 34 mm it smokes a little less mods port and polished head 10.5 compresion piston k&N filter supertrapp exhouse all disout

  6. #6
    Join Date
    Apr 2006
    Location
    Crestview, Florida
    --
    2,429
    its not so much the carb but the jetting, get a variety of sizes and play around with it.
    The person who says it cannot be done should not interrupt the person who is doing it.


    Rides
    85 ATC350X
    85 ATC200X


    My Feedback http://http://www.3wheelerworld.com/...-for-Erics350x

  7. #7
    350xrider911 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Nov 2007
    Location
    porter texas
    --
    301
    ok i though i got it but the went to start it in about half throutle it backs fire and shots out flames but if i east into it it dont bearly do any thange.

  8. #8
    350xrider911 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Nov 2007
    Location
    porter texas
    --
    301
    what about ring gap what happens if its to small will tha afect any thange

  9. #9
    Join Date
    Mar 2006
    Location
    PA
    --
    3,515
    to small = broken or fast worn out rings
    80s......185 atc, Yamaha tri-moto 200, 85 200x with tons of work
    90s......89 Suzuki quad racer 250 (raced 250 A class for 6 years, late 90s.. custom framed 250x with long travel shocks and a built 350x motor.... built Honda 110
    00s...... chomeoly framed 350 RX with all the goodies (thanks to my bro)
    2012.....Replaced the 350x motor for a 444cc YZ426
    WWW.HREATV.COM

  10. #10
    350xrider911 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Nov 2007
    Location
    porter texas
    --
    301
    crap cuz mine was a little smaller then what there suposed to be

  11. #11
    350xrider911 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Nov 2007
    Location
    porter texas
    --
    301
    how fast will it worn them out.

  12. #12
    Join Date
    Apr 2006
    Location
    Crestview, Florida
    --
    2,429
    Just alitlle shouldn't hurt to much.

    Double check your cam timing and valve adjustment.
    The person who says it cannot be done should not interrupt the person who is doing it.


    Rides
    85 ATC350X
    85 ATC200X


    My Feedback http://http://www.3wheelerworld.com/...-for-Erics350x

  13. #13
    Join Date
    Mar 2006
    Location
    PA
    --
    3,515
    if you have to little of a gap the ring ends will butt into each other and press the ring into the cyl and it will ware FAST.

    i did this once too and it only ran right for a day or 2

    the ring gap HAS to be with in spec

    from your other thread i can tell your bike is smoking because the rings are bad....sounds like you were trying to blame the bike when it sounds like you messed up...lol
    80s......185 atc, Yamaha tri-moto 200, 85 200x with tons of work
    90s......89 Suzuki quad racer 250 (raced 250 A class for 6 years, late 90s.. custom framed 250x with long travel shocks and a built 350x motor.... built Honda 110
    00s...... chomeoly framed 350 RX with all the goodies (thanks to my bro)
    2012.....Replaced the 350x motor for a 444cc YZ426
    WWW.HREATV.COM

  14. #14
    350xrider911 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Nov 2007
    Location
    porter texas
    --
    301
    the ring end didnt but the ring gao i thank was a .32 and it was suposed to be a 42 -47 not sure any more but the guy att he motorcycle dealer sed it should be fine he sed hes never had to file down a ring from wisco

  15. #15
    Join Date
    Mar 2006
    Location
    PA
    --
    3,515
    your measurement is way off....if thats what you did then thats why its smokeing

    if the gap is to small when the rings heat up they will expand and then hit and ruin themselves
    80s......185 atc, Yamaha tri-moto 200, 85 200x with tons of work
    90s......89 Suzuki quad racer 250 (raced 250 A class for 6 years, late 90s.. custom framed 250x with long travel shocks and a built 350x motor.... built Honda 110
    00s...... chomeoly framed 350 RX with all the goodies (thanks to my bro)
    2012.....Replaced the 350x motor for a 444cc YZ426
    WWW.HREATV.COM

//ArrowChat Integreation Code //