Trike Fest Drag Classes & Rules

[Bryan Raffa]

OK after MUCH Thought there will be NO NITROUS OR ALKY in MOD class..if your running this your automatically bumped to OPEN. This was brought upon for fairness to the mod class..

mod class now state's............

3. Modified class.
-OEM trikes only
- any bike that has been modified Carb,bore,aftermarket cylinders,Big bores,long rods. NO engine swaps, or hybrids.
-swing arms, can be any length.
-wheelie bars, you can run a wheelie bar
-NO ALKY or NITROUS
-exhaust,pipe in or out of frame ok
-Studs permitted,must be ice screws,No picks,bolt tires,ect,atv use only.
-Basically created for the powervalved,big bore..300,310,330, stroker,ect.
-If you don't think you have what it takes to run with the big dogs in the open class..this is for you.
*****At tec's discretion, heavily modified machines may be bumped to the open class in the interest of fairness to other competitors

[ATC-Eric]

YA!!!!!!!!!!!!!!!!!!!!!!!!!!! LISTIN TOO THIS... I beat andera more than 2 times with my 490 on thursday!! she was on GAS.. that night they went back and switch to alky... SO.. maybe I should just put NO ALKY in MOD class and that would take care of that list... Jason halls bike is set up for NITROUS.. maybe I should put NO NITROUS too...viper.. his is on alky.. DO YOU THINK THATS FAIR? TOO YOU..Eric...

Is Alky not okay in the modified class? Ill run Jason on nitrous..........


From talking to Andrea and Cory in Oklahoma, I remember them saying they were on gas........ Could be wrong, thats just my recolection.


I really dont have the amount of time to respond here that I would like, Im headed back to the garage to finish my truck.

I dont gots no beef, I just want to make sure whats going on, sometimes I get ahead of myself.



And you really didnt address FUEL in your list for the moddified, whats kosh?


EDIT: You beat me by a second Raffa.



That sucks

[Bryan Raffa]

Is Alky not okay in the modified class? Ill run Jason on nitrous..........


From talking to Andrea and Cory in Oklahoma, I remember them saying they were on gas........ Could be wrong, thats just my recolection.


I really dont have the amount of time to respond here that I would like, Im headed back to the garage to finish my truck.

I dont gots no beef, I just want to make sure whats going on, sometimes I get ahead of myself.



And you really didnt address FUEL in your list for the moddified, whats kosh?


EDIT: You beat me by a second Raffa.



That sucks

just did eric

[1upfront]

If I make it out it looks like I'll be running the 300r in the mod class

[Bryan Raffa]

If I make it out it looks like I'll be running the 300r in the mod class

I hope you do.. your pretty close to IN...

[dizasterzrfun69]

If I make it out it looks like I'll be running the 300r in the mod class

bring it


EDIT: i love that fuel rule for the modded class, i hope it wasnt a sarcastic rule change. Even better for me.

it keeps getting better for me and im STILL gonna lose LMAO

[Bryan Raffa]

absolutely not .. it was over looked in the mod class..as you can see it was in the other classes..but nothing was stated in the modified class.

[1upfront]

I'm gonna try real hard to make it at least for the drags.

[hadar]

I was really looking forward to competing in the stock class this year. Can I run my 300cc kit in the stock class? Or would I have to run in modded class? I may end up running a 250cc jug for stock class if I have to. Kx cylinder ok? Perhaps I sould just run my 84(which is stock) in the stock class and the 300 in the modded class.

[Tekawte1]

Naww Ya gotta run the 300 in the mod class.. Its hondaline but its not the stock cyl.. Gotta run the 250 to be in the stock class..

[Bryan Raffa]

Naww Ya gotta run the 300 in the mod class.. Its hondaline but its not the stock cyl.. Gotta run the 250 to be in the stock class..

thats correct

[1upfront]

I'm gonna to race my 83 250r trail bike in the stock class you boy's had better watch out I have a "THRUSTER" tailpipe lol.

[Billy Golightly]

I was really looking forward to competing in the stock class this year. Can I run my 300cc kit in the stock class? Or would I have to run in modded class? I may end up running a 250cc jug for stock class if I have to. Kx cylinder ok? Perhaps I sould just run my 84(which is stock) in the stock class and the 300 in the modded class.

If the 300 kit is in a stock, OEM original cylinder then it can go in the stock class. NO Hondaline 300 kits in the stock class. But if you have a LA Sleeve 295 kit in a stock 250R cylinder, your OK. Whatever you can fit or do to the inside of the original motor is pretty much fair game.

[hadar]

If the 300 kit is in a stock, OEM original cylinder then it can go in the stock class. NO Hondaline 300 kits in the stock class. But if you have a LA Sleeve 295 kit in a stock 250R cylinder, your OK. Whatever you can fit or do to the inside of the original motor is pretty much fair game.

Cool, Thanks for clearing that up. My brothers talking about running in the stock class too. I can hardly wait.

[tecat-z]

Oh boy, sprock 300 Tecates, sprock 310 tri-z's, 310 liquid r's. As a very wise man once said. " you'll find me next to the cooler"