the chevy 302 is a bad trailprotrailprotrailprotrailprotrailpro, i've been looking for one for years and have not came across any, they are extremely rare, but one of the fastest and quickest motors i've every seen.
At The Back Of The Pack
Arm chair racerFirst time rider
the chevy 302 is a bad trailprotrailprotrailprotrailprotrailpro, i've been looking for one for years and have not came across any, they are extremely rare, but one of the fastest and quickest motors i've every seen.
1988 Tecate 4 "Team Green Neck Breaker"
Just Too Addicted
Arm chair racerJust too addicted
250R forever,a chevy 302 is a 283 block with a 327 crank!,or it could be the other way around,but i know its a 283 block with a 327 crank or a 327 block with a 283 crank -D
1985 Tecate restoration project-R.I.P
Power User
Teaching quads a lesson
lets try again
http://www.boomspeed.com/stroked342/c4.jpg
http://www.boomspeed.com/stroked342/c5.jpg
http://www.boomspeed.com/stroked342/c6.jpg
Power User
Teaching quads a lesson
at the track
lift off 8)
what a big smile
my new project
my old stang at the bottom
Got The Holeshot
Arm chair racerJust too addicted
Looks like that Fox body mustang will make a good drag car. I see a sn95 model mustang in the background too....
06 TRX450r , 85 ATC250r, 01 TRX300ex, 84 ATC110
88 Mustang GT
Power User
Teaching quads a lesson
the new project has a 347 stroker and other goodies.
At The Back Of The Pack
Arm chair racerFirst time rider
i don't know what size the block or crank is, i just know that i seen them lift the front tires off the ground at a local dragstrip.
1988 Tecate 4 "Team Green Neck Breaker"
Got The Holeshot
Arm chair racerJust too addicted
Thats what i want to buy to put in my Cobra but we are Broke... :evil: :xOriginally Posted by 200x Basket
06 TRX450r , 85 ATC250r, 01 TRX300ex, 84 ATC110
88 Mustang GT
Power User
Teaching quads a lesson
well if you are on a tight build a nice 351W. just re-ring it, buy some gt40-p heads and a edelbrock performer rpm intake with a holley 750 double pumper. it will make about 325 HP and 400 ftlbs of torque. that will make a mustang II fly. you may have fitment problems though
First Time Rider
Arm chair racerNew to the board
I kinda have a muscle car!......1976 Ford Capri 2.8.........just sprayed mettalic blue.....engine rebuild......leavin it mostly stock and beautiful.....
those cars are bad ass! ALL OF EM!
-Josh
I HATE saying "It was like that when I got it"!!!
No Pain, No Gain
Life Goal: To find the guy who said "there is such thing as too much power", and kick his ass!!
Red 86 200x ATC BAD ASS
Red 84 TRX200x
Red 83 185s
Red 84 200x
Blue 84 200s
lookin for 350x
Got The Holeshot
Arm chair racerJust too addicted
200x basket.. a 351w is i think 5 inches wider than a stock 302 and the is like a 1" of cleance on each side of the 302 that was in it... I have a 351w in my F-100 that i am gettin ready to pull again. I mgiht just set ti down in there and see what it does.. hehe
06 TRX450r , 85 ATC250r, 01 TRX300ex, 84 ATC110
88 Mustang GT
Power User
Teaching quads a lesson
a 351W is about 1" wider and has about 1" taller deck. the 351M is a big block and most likely what you have in your truck
Power User
Teaching quads a lesson
What's the difference between a 351M, and a 351W?
Trikes:
1973 Honda ATC70-orange!
(2)1985 ATC70
1985 Big Red 250
1985 250R
Power User
Teaching quads a lesson
everything
Got The Holeshot
Arm chair racerJust too addicted
The 351m is a big block, and teh 351w is a small block.
200xbasket. I know my truck has a 351w in it. For sure, i just rebuild it a few months ago.. The 351w has got to be more than 1" wider than a 302.... I might just build the 302 stock back up wiht some 289 heads and a Intake and carb and some headers and go from there
06 TRX450r , 85 ATC250r, 01 TRX300ex, 84 ATC110
88 Mustang GT
Reply With Quote
