i got a used motoplatt recently for my 250r and need to figur eout how to set the timing i dont know witch set of timing marks is on the flywheel and where on the flywheel should the key way go sinc ethe motplatt has none?
Power User
The day begins with 3WW
i got a used motoplatt recently for my 250r and need to figur eout how to set the timing i dont know witch set of timing marks is on the flywheel and where on the flywheel should the key way go sinc ethe motplatt has none?
ok here goes, 85 atc70,2 84 atc70's 83 alt50,83 atc110 , 70 us 90 parot green, 85/86 350x garage queen, stock rider 85 350x, project 85 350x 85 250r drag bike, 2 85 250sx's, alt185, , scat tracker?99blaster,85 250r rider,85 250r ice racer project ,93 kx500,99 xr200r, 91 dr250s ,89 lt500 quadzilla,88 lt250quadracer, 88 trx250r race full on race quad,, 01 yamahakodiak400, kawaki kd100,lt50 for my doughters,93 300ex, 230 quadsport, lt185, lt250 quadrunner,84200s, is that enough?
Loves Corn.
Catch me if you can
hey Moose Nuckel..here ya go
http://www.pentonimports.com/install.htm
Twinkle Toes
The day begins with 3WW
Originally Posted by Bryan Raffa
Nate
The Myth, The MAN, The Legend
R.I.P HRR
Power User
Roostin Away
you guys crack me up like brothers!!
2- 85 Tri-Z's black and Yellow
2- 85 250SX's
1- 85 200X
3-ATC 70's
2- 85 tri-zinger's who needs some parts
Power User
The day begins with 3WW
i got it on and roughed in jus nee dto fine tune it
ok here goes, 85 atc70,2 84 atc70's 83 alt50,83 atc110 , 70 us 90 parot green, 85/86 350x garage queen, stock rider 85 350x, project 85 350x 85 250r drag bike, 2 85 250sx's, alt185, , scat tracker?99blaster,85 250r rider,85 250r ice racer project ,93 kx500,99 xr200r, 91 dr250s ,89 lt500 quadzilla,88 lt250quadracer, 88 trx250r race full on race quad,, 01 yamahakodiak400, kawaki kd100,lt50 for my doughters,93 300ex, 230 quadsport, lt185, lt250 quadrunner,84200s, is that enough?
Roostin' Away
Arm chair racerRoostin Away
Make sure you space the flywheel from the stator using a folded over piece of paper or something like that to center it before you tighten the bolts. It will prevent the flywheel from rubbing and ruining your ingnition.
Loves Corn.
Catch me if you can
good tip there chris!
Power User
Got the holeshot
Def. great tip. Them guys at Penton are top notch in the tech area too if you need info.
Reply With Quote