200x engine mount problem

[MADATC]

Alright, I was out working on both x's getting one ready to sell and I noticed on my other x that the top motor mounts were dangling. After I took the tank off and looked closer the bolt that connects the mount to the engine was sheared off. The hex head must have rusted and sheared off leaving the rest of the bolt thru the engine mount. Two things, 1. the mounts aren't threaded, correct? 2. Can I just drill out the bolt that's stuck in there?

Any help would be great.

Thanks

[tapper190]

No, the motor mounts are not threaded. I would try a punch and to remove the broken bolt.
Tapper

[MADATC]

Yeah I'll try that first. If needed the drilling will be my last resort.

Thanks.

[RedRider_AK]

Unless they're ULTRA corroded and cold-welded inside there, you should have no problems with some PB and a drift punch.