Results 1 to 4 of 4

Thread: 1984 200es rear axle install

  1. 03-11-2008, 12:42 AM #1
    heyketz
    heyketz is offline New to the board Arm chair racerNew to the board
    Join Date
    Jan 2008
    Location
    Spokane,WA
    --
    19

    1984 200es rear axle install

    My Big Red 200es has a bent axle and I want to fix it. I have an axle on the way but was wondering if it's a bear of a job to change axles. Has anyone changed an axle on a 1984 200es and is it a tough job? Any special tools needed, any tips.
    Thanks
    Reply With Quote Reply With Quote
  2. 03-11-2008, 08:54 AM #2
    zoomerman's Avatar
    zoomerman
    zoomerman is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Jun 2005
    Location
    Ontario, Canada
    --
    351
    Not too hard, you need a big wrench to undo the axle bolts but i usally use a pipe wrench. you also need a 12mm wrench to undo the 6 bolts from around the diff housing. and i think a 18mm to take off hubs and the tires. Insect the bearings when you take it apart and make sure to grease every little thing when putting it back together. it isn't that tough of a job to do.
    1985 suzuki alt 185
    1985 honda atc 250sx
    1985 honda atc 200m (all apart)
    1984 honda atc 200es
    1984 honda atc 200x- need motor, plastics, axle, exhaust.
    1984 honda atc 125m- times 2
    1985 honda atc 200m all apart
    1983 honda atc 200e times 2
    1983 honda atc 250r-times 2
    1983 honda atc 200 4 parts

    1983 honda atc 110 times 3
    1979 honda atc 110 smokey
    1978 honda atc 90- restored

    Have lots of extra parts, if interested email at e_mcy@hotmail.com
    Reply With Quote Reply With Quote
  3. 03-11-2008, 04:49 PM #3
    Big red 200es's Avatar
    Big red 200es
    Big red 200es is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Oct 2007
    Location
    canada quebec abitibi
    --
    181
    No I change mine and is easy.
    My machine:

    -Honda 200es Big Red 1984-
    -Honda trx350 2002-
    -Bombardier Tundra 2004-
    -2 Honda atc 125m
    - 1998 Yamaha blaster
    Reply With Quote Reply With Quote
  4. 03-11-2008, 05:07 PM #4
    3Wheelers4Life's Avatar
    3Wheelers4Life
    3Wheelers4Life is offline Got The Holeshot Arm chair racerJust too addicted
    Join Date
    Apr 2007
    Location
    Springfield, PA
    --
    889
    you might be able to put the axle under a press and straighten it. i have seen it done with a 200X axle (but not mine), and have heard of others doing it. but just swapping it out, should not be hard at all to do.
    My Rides
    1983 ATC200 - U-Haul edition - great mudder - SOLD
    1984 ATC200X - sucked a valve - frame up resto & engine rebuild with performance parts in the works
    1987 Suzuki DR200
    199? Go-ped Sport
    Reply With Quote Reply With Quote
//ArrowChat Integreation Code //