Just Too Addicted
Arm chair racerJust too addicted
How hard is it to change the clutch in a 200m? The centrif clutch seems to work right but in the higher gears when your in the throttle it starts to slip unless you let off the gas for it to catch up. I changed bike clutches but never a auto one. Got a shop manual comin off ebay so that will help. But figured I would ask the pros
Master of the DX and Pennsyltucky survivor ,08,09. Thats something to brag about
At The Back Of The Pack
Arm chair racerFirst time rider
i have changed one in my dx when i was about 15 so i figure if i could do it then you should have no problem with it on a 200m probly alot of diff. but just wanted to give you some self esteem.
TRIKES
1983 225 DX
1984 Tri-Zinger
1984 200 X
1985 Big Red
1985 200 X
1985 Tri-Z
1985.5 Tri-Z
1986 Tri-Z
BIKES
1978 YZ250
2010 YZ250F
2015 WR450F OHIO Street Legal
Just Too Addicted
Arm chair racerJust too addicted
Thanks
Master of the DX and Pennsyltucky survivor ,08,09. Thats something to brag about
Power User
The day begins with 3WW
so is it the mechanical or cintrifugal clutches that are bad? if its the cyntrifugal ones thier easy to replace of its the primary they can be a pain since it requires a special puller to get them off.
ok here goes, 85 atc70,2 84 atc70's 83 alt50,83 atc110 , 70 us 90 parot green, 85/86 350x garage queen, stock rider 85 350x, project 85 350x 85 250r drag bike, 2 85 250sx's, alt185, , scat tracker?99blaster,85 250r rider,85 250r ice racer project ,93 kx500,99 xr200r, 91 dr250s ,89 lt500 quadzilla,88 lt250quadracer, 88 trx250r race full on race quad,, 01 yamahakodiak400, kawaki kd100,lt50 for my doughters,93 300ex, 230 quadsport, lt185, lt250 quadrunner,84200s, is that enough?
Reply With Quote