200 honda guys i need some info

[i58829]

I was thinking of a cheap way to make something to putt around and also one i can trust my friends to ride. I have the other X's and the R so this would be a cheap ride (under 500.00 total) I got that PC'd frame and such this weekend, and i have a complete rear end set up minus the hubs already so its pretty much down to plastics and a motor.

I have a 200 motor and trike but your too far away from me.

Well the frame and what not is up in Pa, we're planning on moving back up the in July so it may not be too far. We have some friends over in Columbus i'm sure we'll be visiting at some point. But thats still a couple months away...

[jason85atc250r]

I was thinking of a cheap way to make something to putt around and also one i can trust my friends to ride. I have the other X's and the R so this would be a cheap ride (under 500.00 total) I got that PC'd frame and such this weekend, and i have a complete rear end set up minus the hubs already so its pretty much down to plastics and a motor.



Well the frame and what not is up in Pa, we're planning on moving back up the in July so it may not be too far. We have some friends over in Columbus i'm sure we'll be visiting at some point. But thats still a couple months away...

i have a couple 185 and 200s motors floating around

[i58829]

That's be great Jason any chance they shift up? Either way maybe when i get down to hershey to pick up the 86 and the frame i'll swing over your way and see what we can work out. I'm really not sure what all the frame will need it looks like it had some wiring, and all of the motor/swinger mounts and bolts so it shouldn't be too tough to get it together. Any chance you have some used but not junk early X fenders? I'll get with you closer to the time. Maybe i'll have this R roller still to offset the cost, TC...

[84honda200s]

the ones that shift up arnt too easy to come by. if i remember rite they arnt too cheap either.

[jason85atc250r]

That's be great Jason any chance they shift up? Either way maybe when i get down to hershey to pick up the 86 and the frame i'll swing over your way and see what we can work out. I'm really not sure what all the frame will need it looks like it had some wiring, and all of the motor/swinger mounts and bolts so it shouldn't be too tough to get it together. Any chance you have some used but not junk early X fenders? I'll get with you closer to the time. Maybe i'll have this R roller still to offset the cost, TC...

i have some cracked fenders that needs some zip tie repair. all the 200 motors shift down it;s not that bad you get used to it.

i have mountians of old style 200x stuff i'll trade for the 250r roller

[i58829]

Awesome looks like i will just drag that thing north with me. Its all torn down now anyway so its not taking up a lot of space. If you end up with a complete running 200 set it aside as well, i will need one complete carb to pan, and some form of exhaust...

[jason85atc250r]

when your doing a auto-x you need a 200x exhaust and intake that bolts to the head. the 200s intake is angled wrong and wont work. 200x exhaust blts rite up no modding

[saladboy]

i have one you can have cheap.here a pic.tell me what you want to pay and its yours.it did run whe i took it out.its out of a 84 200s it will need a recoil.