New to the board
Arm chair racerNew to the board
110 carb help
I got my wifes 110 all put back together and man does it look sweet, fresh paint and everything, pics soon. But i redid her carb and im having a problem with the drain on the bottom of the carb leaking ALOT when i try to start it. THe bottom screw is tight and i know i did the overhaul right. new gaskets, jets, and sealled all the normal leak locations. Can anyone help since gas is so expensive and i really dont want her to hurt?
Trikes:
84 200s
85 110
If at first i dont get it started, start pulling with the other hand till it hurts.
At The Back Of The Pack
Arm chair racerAt the back of the pack
i had the same problem on my 200S and a guy i know who knows his stuff told me i need a new needle and seat or something like that.So I just bought a 2nd hand carb
1985 Honda ATC200S
1994 Kawasaki Eliminator EL250
Just Too Addicted
Arm chair racerJust too addicted
Try adjusting the float.
'85 Honda 250ES Big Red
'97 Polaris Sportsman 400 4x4 2-stroke
'04 EZGO TXT
Former trikes;
85 & 86 ATC 250es Big Reds, 200e, 185s, 200s, (2) '84 250r, Yamaha 175 2-stroke, ATC 70, (2) ATC 110, TriZinger 60
***GOD BLESS AMERICA AND OUR TROOPS***
At The Back Of The Pack
Arm chair racerFirst time rider
yes check the float. I am sure it is not installed correctly. I had the same problem on my 110.
New to the board
Arm chair racerNew to the board
so how o i adjust it???
Trikes:
84 200s
85 110
If at first i dont get it started, start pulling with the other hand till it hurts.
At The Back Of The Pack
Arm chair racerFirst time rider
I can almost guarantee that when you take the bowl off you can see that either the spring is not in correctly or the pin is not in the float.
New to the board
Arm chair racerNew to the board
ok thanks, ill go try that
Trikes:
84 200s
85 110
If at first i dont get it started, start pulling with the other hand till it hurts.
Reply With Quote