DC's 20 Day 86ATC200X TF08 BUILD!! Nerfs, Hoosiers, Durablue and other changes...

**bigpimpin** · 11-25-2008, 02:03 AM

that is a sweet setup. I am looking to put 28mm flatside, too. I was wondering how it would get mounted. Looks like White Bros just made a flange so it could just bolt on. Thanks for posting

**bigpimpin** · 11-25-2008, 02:09 AM

How do you like the throttle response with the flatslide? any improvements?

**The Goat** · 11-25-2008, 02:27 AM

did you bore that intake or consider machining a newer one?

I've never understood how we all purchase new carbs but most run the tiny ass stock intake...

**NINJA** · 11-25-2008, 02:42 AM

Hey DC, lookin good man! I'm sorry I wasn't able to answer all your questions while you were doing that build. I was up to my armpits in busted up HUMVEEs at the time. Anyways, I'm bringing my 86 200X down here to Moab so hopefully I can finish that thing. Keep up the good work and keep the rubber side down!

**Dirtcrasher** · 11-25-2008, 05:12 PM

Originally Posted by NINJA

Hey DC, lookin good man! I'm sorry I wasn't able to answer all your questions while you were doing that build. I was up to my armpits in busted up HUMVEEs at the time. Anyways, I'm bringing my 86 200X down here to Moab so hopefully I can finish that thing. Keep up the good work and keep the rubber side down!

I hope to get together with you when you get back at it.....

I scored a brand new Supertrapp, a sprocket specialists 35 rear aluminum sprocket and the terry cable. I'm adding as many sweet parts to this as I can.

I wonder if I'll ever find a Wescoast for an 86/87X

I have to get 5 gallons of VP or Cam2 before I can get it all dialed in, I ought to have enough friggin jets by now

Got the new Mikuni in today......

Just gotta turn it down and build a flange. I hope the rear intake is on center to the front, otherwise I'll have to take it apart, mount the flat surface down on the mill and use a boring head to turn the outside down on center.

It's uhmmmmmmmmmm, gonna be awhile kids

**honda250sx** · 11-25-2008, 05:24 PM

Heat the shop and put a turkey in the oven. I'm coming over!

**bigpimpin** · 11-25-2008, 11:38 PM

how did you score a new supertrapp? I can't even find a used one

**honda250sx** · 11-26-2008, 12:07 AM

Steve where'd ya get it?

**Dirtcrasher** · 11-26-2008, 02:33 PM

LOL..........

The inlet and outlet are not on center. But there's another way to do it. I forgot I have a four jaw chuck!! Just takes more setup time, thats all......

I gotta find someone willing to make me a 4 mil stroker kit and I'll start another motor from scratch. I think I have 7 86/87 200X motors

**Dirtcrasher** · 12-05-2008, 10:28 PM

Brand new Super Trapp is now installed after the Mikuni flatslide - I'm getting the finishing touches done!!

It started out tough, I have only one "cone" and no matter what I did, it rubbed the frame so that didn't work. I ended up slicing it on the band saw and rotating it about 20 degrees give or take to get it lined up.

Then I just migged it back together. So here is welded and on the bench..... I used Hi temp "smooth" black powder.

And then here it is installed.

The headpipe is an 85 Cobra and you have to heat it up and tweak it just a hair, and chop off a few inches. If you don't have the ST headpipe, it's an option.

Jeffmeister, I still have to.... (want

) buy that ST cone from you (If I still can!!) I think yours was an 85 200X cone but I can chop, grind, lengthen and weld that snapper up

I'd like to try and roll form another one for a pattern.....

The kicker is off of the motor to be PC'd as well.... The stock paint was junk in 2 rides and washes

It's all good, I'd rather PC it and be done with rustoleum type paint....

I have a bit more jetting to do, maybe a new rear fender (Whats the point? I ride, I crash and this one is good enough....) and I need a better rear master cylinder that fits in and out of the way. The stock one may work, not sure what this one is but the other 86 maters I have a beatup and nasty......

**honda250sx** · 12-05-2008, 10:37 PM

Steve its yours. Did my exhaust spreaders help you? Where did you get that CONE?

LOL...

Looks great man. Great fab work!!

I still need to buy some mounts and stainless clamps for you too. I will be off TWO WEEKS @ xmas and I will get them for you!

Give me a call!

**honda250sx** · 12-05-2008, 10:45 PM

I put my avatar up just for you. That's bridgewater, mass's DAVE PEREWITZ. Legendary chopper builder!

**Dirtcrasher** · 12-05-2008, 10:51 PM

Originally Posted by honda250sx

Steve its yours. Did my exhaust spreaders help you? Where did you get that CONE?

LOL...

Looks great man. Great fab work!!

I still need to buy some mounts and stainless clamps for you too. I will be off TWO WEEKS @ xmas and I will get them for you!

Give me a call!

I will soon and -

Oooooooooooooooooh, I loved em SPREADERS!!

I'll definitely take that cone and the price is yours!! Be prepared for me hounding you about the clamps next

Actually, you knew we could get them at McMaster.... I think we were both looking at a "bulk" buy, thats all. I check the individual pricing this weekend and I don't even need them at this stage. - I'm just always looking to the future, the future when I crash that is

HOW! Did you Z guys miss that Bassani Chris grabbed

Dam, he was just rying to make $$

**honda250sx** · 12-05-2008, 11:10 PM

Hmmm. I can't charge ya anything for that pipe...

Them spreaders are the cats ass. Super trick tool!

Clamps are coming. I can get them both for about $8 in STAINLESS...

I know I know. Totally seen that prick too on evilbay. I don't know how that missed my list of bids... Sad day indeed!

**tanks350x** · 12-06-2008, 08:49 AM

Originally Posted by honda250sx

I put my avatar up just for you. That's bridgewater, mass's DAVE PEREWITZ. Legendary chopper builder!

Just so you know, Steve lives about 15 minutes from his shop, if that

Thread: DC's 20 Day 86ATC200X TF08 BUILD!! Nerfs, Hoosiers, Durablue and other changes...

Thread Tools

SuperTrapp PC'ds ands installed!