How would i go about tightening the chain on my 200S
How would i go about tightening the chain on my 200S
1985 Honda ATC200S
1994 Kawasaki Eliminator EL250
there is four bolts that hold the rear axel and hubs to the frame...loosen them and then tighten the little adjuster that is at the bottom left side its real easy
current rides
82' ATC110
85' ATC310R
85' ATC250R
85' ATC250ES
16' brute force 750
Im not 100% sure of what u mean. Would u be able to get some pics and highlight what bolts il need to adjust
1985 Honda ATC200S
1994 Kawasaki Eliminator EL250
you need to download a manual or earn enough $ to pay a mechanic
The person who says it cannot be done should not interrupt the person who is doing it.
Rides
85 ATC350X
85 ATC200X
My Feedback http://http://www.3wheelerworld.com/...-for-Erics350x
get behind the 200s right by the muffler...look for where the rear axel assembly mounts to the frame...there are for i believe 17 mm bolts you will loosing...then tightind the adjuster to the bottom left hand side
current rides
82' ATC110
85' ATC310R
85' ATC250R
85' ATC250ES
16' brute force 750
i still dont see what the point in loosening the axle bolts is there is 2 on each side right? Why should I loosen the ones on the opposite side to the chain?
1985 Honda ATC200S
1994 Kawasaki Eliminator EL250
Because the whole carrier moves when you turn the 12mm adjusting nut. Don't bite the hand that feeds ya, we try to help and get nothing but flack from ya. Your name isn't James is it?
36 yo, Apple geek, married with kids, conservative. If you are a GUN OWNER and not a member of the NRA, SHAME ON YOU! JOIN!
Gun control is not about guns, it's about CONTROL!
My Rags
85 ATC70,85 ATC70,85 ATC110,83 ATC185S,85 ATC250ES,02 400EX,04 Polaris ATP 500
Past rags:2000 Scrambler 400, 86 350X, 86 250R, 84 200S, 97 ATK260LQ