85 250r master cylinder

[the super 1]

the rear brake master cylinder in not working on my 1985
250r. does anyone know if the rear master cylinders are
interchangeable with any other model? such as 350x
or a 200x, or even an older 250r 83-84 models. any info
on this is appreciated. thanks




The Super 1

[Jonpin]

cant you just rebuild it i know you can get the 350x rebuilds for like 35 bucks

[MyMistress86R]

cant you just rebuild it i know you can get the 350x rebuilds for like 35 bucks

Ditto on 250R rebuild kits. I had to do mine a while back and it was easily done in about 30 minutes.

[the super 1]

yeah it can be rebuilt. the kit costs $65 plus shipping.
i was just trying to save some coin. ebay has some 200x
and older model 250r master cylinders going for cheap.
thanks for the response.






The Super 1

[SWIGIN]

for like $20 or less you can get any newer slightly used dirt bike or quad rear master cyl on ebay and just make a simple plate up like i did.

i know your rod going down to the pedal is probaly longer then this one but i think they can be swaped out real easy

[Jonpin]

for like $20 or less you can get any newer slightly used dirt bike or quad rear master cyl on ebay and just make a simple plate up like i did.

i know your rod going down to the pedal is probaly longer then this one but i think they can be swaped out real easy

hey thats good idea never thought about that

[torker]

If you use a Suzuki Z400 / Kawasaki KFX 400 rear M/C it will bolt right up.
No mods. I have done this on two of mine. Ahhh, and they were really cheap of off e-bay. I did mod the reservoir line a bit just to be sure. Good luck and hope this helps.
TORKER.

[the super 1]

thanks torker, that's the kind of information i was looking for.
i'll check out ebay immediately. and thanks to everyone else
that responded.






The Super 1