Results 1 to 5 of 5

Thread: honda 125 hi/low replacement question

  1. #1
    Join Date
    Mar 2007
    Location
    Texas
    --
    5,045

    honda 125 hi/low replacement question

    there's a local kid here that wants me to fix his 125. his chain poped off and he said it broke a box that bolts to the side that has his hi/low gearing. I have not seen the trike yet, but was wondering is it easy to replace and whom here has spare parts they can sell me?

    He's going to give me a 200s (motor in prices due to needing a rebuild and he didn't know how to do it) in exchange for doing the labor and him buying the parts.

    attached are some photos of the broken part(s)
    again I'm wanting to BUY the parts needed to fix this ATC.
    Attached Thumbnails Attached Thumbnails Honda ATC 125m 001.jpg   Honda ATC 125m 007.jpg   Honda ATC 125m 011.jpg   Honda ATC 125m 012.jpg  
    Last edited by oscarmayer; 08-20-2008 at 09:33 PM.
    ________________
    I'm just a squirrel "Trying" to get a nut!

    Nearly every kind of Honda ATC (plus some custom ones
    several Yami Quads (mostly custom built for MX racing)

    https://www.mikesatvfix.com

    "Freedom is not free...but the U.S. Marine Corps will pay most of your share."

  2. #2
    Join Date
    Mar 2007
    Location
    Texas
    --
    5,045
    ok i purchased the gears and hi/low setup from online.
    now, i need the sub trans case. the subtransmission cover or case that is in the first pic. if you look closley, it has part of it broken away.

    that or a complete bottom end.
    ________________
    I'm just a squirrel "Trying" to get a nut!

    Nearly every kind of Honda ATC (plus some custom ones
    several Yami Quads (mostly custom built for MX racing)

    https://www.mikesatvfix.com

    "Freedom is not free...but the U.S. Marine Corps will pay most of your share."

  3. #3
    Join Date
    Sep 2007
    Location
    100mi west of Chicago
    --
    3,582
    You're going to need a new or used side cover spacer (#1 on this pic) since the round hole that holds the shift part that goes back and forth is broken. I bought a used one recently on eBay for cheap. Just have to keep an eye out since there doesn't seem to be a ton of 125m parts on there.

    Rob

  4. #4
    Join Date
    Mar 2007
    Location
    Texas
    --
    5,045
    it's the left side cover?
    ________________
    I'm just a squirrel "Trying" to get a nut!

    Nearly every kind of Honda ATC (plus some custom ones
    several Yami Quads (mostly custom built for MX racing)

    https://www.mikesatvfix.com

    "Freedom is not free...but the U.S. Marine Corps will pay most of your share."

  5. #5
    Join Date
    Mar 2007
    Location
    Texas
    --
    5,045
    i just ordered from a canadian dude. can't find any here in the states. looks like the artic north is the place to find honda atc parts.

    http://merrittmotorcyclesalvage.com/
    ________________
    I'm just a squirrel "Trying" to get a nut!

    Nearly every kind of Honda ATC (plus some custom ones
    several Yami Quads (mostly custom built for MX racing)

    https://www.mikesatvfix.com

    "Freedom is not free...but the U.S. Marine Corps will pay most of your share."

//ArrowChat Integreation Code //