how do i get the crank case apart on a 94 kx 80 dirt bike do i have to take the clutch basket off
New to the board
Arm chair racerNew to the board
how do i get the crank case apart on a 94 kx 80 dirt bike do i have to take the clutch basket off
Power User
Catch me if you can
You won't like my answerbut, the 1st thing you need are the right flywheel and case removing tools and a service manual.
TRUST ME!! Just winging it will only end up with the thing being parted on EBAY. There's allot to splitting a motor whether it's a 2 stroke or 4 and it's really an advanced mechanical type of work........
When I was a young teen, I ruined MANY parts just because I didn't know any better.
All our government does is distract us while they steal from us, misspend our tax $ and ruin our country
Power User
Got the holeshot
and the cases have to be pressed back together
The person who says it cannot be done should not interrupt the person who is doing it.
Rides
85 ATC350X
85 ATC200X
My Feedback http://http://www.3wheelerworld.com/...-for-Erics350x
Power User
Teaching quads a lesson
if you have to ask that question, i wouldnt even attempt to try.
1985 KXT 250 Tecate - kx cylinder, kx ignition, bassani headpipe, answer silencer, v-force reeds, 38mm airstyker carb, +2 franks swinger, raptor rear shock.
1996 YSF240 Blaster - maxxed out!!!
Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "HOLY SH-T, what a ride!"
Reply With Quote