Dismounted 5 200X 350X and 250R front tires. Tossed 3 badly cracked ones, remounted one nearly new 200X front tire on a 350X wheel and saving the other nearly new one for another project. Made templates for mounting 200X reservoir on custom frame.
Got The Holeshot
Arm chair racerJust too addicted
Dismounted 5 200X 350X and 250R front tires. Tossed 3 badly cracked ones, remounted one nearly new 200X front tire on a 350X wheel and saving the other nearly new one for another project. Made templates for mounting 200X reservoir on custom frame.
New to the board
Arm chair racerNew to the board
Well yesterday I decided to replace the clutch cable, parking brake cable and brake pads on my 200X.. Today on the 350X, I changed the fork oil and seals. Lately I have been noticing a squeak in the rear suspension so tonight I pulled the rear axle and swing arm. All bearings were clean and tight. Pulled off the shock, cleaned it up, change fluid and recharged with nitrogen. While I had it apart, I decided to pull the rear caliper apart, clean it up and install fresh pads. I'll finish putting it back together in the morning and take it for a ride.
83 200X (85 engine & swingarm)
85 200X
85 200X
85 350X
84 250R (basket)
Other Toys:
89 Suzuki RM125
04 Snow Hawk 600 HO
01 Harley Road King
05 Harley Road King
83 Honda 550 Nighthawk
74 Kawasaki 900Z1
Power User
Roostin Away
Moved all the trikes around stared at them a bit until my wife came out an said WTF why you have a woody!!!! Hahaha
Just Too Addicted
Arm chair racerJust too addicted
Changed the rear tires on the 85.5 Z, HAD to get rid of the 22" Trail-Pro's. Put some 18" Razr MX on in their place. Jeez did it help that wore out feckin bike. Also got the powervalve top end and parts an crap bought for the 6-speed motor build. Got the retired flat track racer 85 back into a complete rolling chassis. Then tried seeing how the 500 will fit into it. IT DONT. So got to looking at the 500 chassis to see how hard a bike conversion will be. It won't be. So I'm talking to my welder now.
Got all the front brake parts ordered for the 350X too.
too many bikes to count. too little time on hand.
Just Too Addicted
Arm chair racerJust too addicted
Replaced a petcock on my dads 85 SX. Threw some air in the tires and rode the other two around a bit after a good wash. Got me pumped about getting my own bike.
Current Bike:
1985 Honda 350X
Bikes owned:
1984 Honda 200X
1982 Honda 250R
1985 Honda 350X x3
1985 Honda 250R x2
1985 Honda 500X
Power User
Roostin Away
I got my Tecate an early Christmas present,,,a Sprock Racing BB Kit!!! Just to be fair... I got a few stocking stuffers for the Tri Z's too.
Attachment 180601Attachment 180602Attachment 180603
Got The Holeshot
Arm chair racerJust too addicted
Put my last 200X up on C/L after taking the 350X suspension off it
At The Back Of The Pack
Arm chair racerAt the back of the pack
http://youtu.be/WyFv3uQh4wU
this is what i did with my 83 110 yesterday
http://www.youtube.com/user/effortequalsresults
83 atc 110
77 atc 90
80 atc 110
85 200x
85 200x
87 250es
79 atc 110
1978 atc90
1985 200s
1985 atc70
1983 atc 70
New to the board
Arm chair racerNew to the board
I just pulled the 350x out of the shed, kicked her twice and let her purr, and reminded myself how well it runs.
Just Too Addicted
Arm chair racerJust too addicted
this makes me feel so stupid lol, when i was putting bearings in my 250r i forgot to put in the bearing sleeve -.- but lucky the bearing was still frozen so it just popped out with no damage lolOriginally Posted by effort=results
Currently Own-
84 250R My Baby/Project
83 Yamaha 225dx
79 Honda Twinstar - Big Ole Turd
Heres My Feedback Page
http://www.3wheelerworld.com/showthr...for-ColtonGG33
Power User
Got the holeshot
Put my Bills pipe on my 81 250r.The head pipe I bought back in 85.The silencer I bought from (easymoney1979 ) on here.
250r rules
At The Back Of The Pack
Arm chair racerAt the back of the pack
Took my newly rebuilt 200x out for a ride in the first snow of the season!
1985 KLT 160
1985 YTM 200ERN
1984 YT 60
Reproduced KLT 160, 110 decals for sale
Reproduced YTM200ERN decals for sale
http://www.3wheelerworld.com/album.php?albumid=2655
Feedback thread: http://www.3wheelerworld.com/showthr...uffin+feedback
Power User
Teaching quads a lesson
Painted up the exhaust on my 82' 70 with black header paint and went rippin it up in the snow.
Trikes
1970/71 US 90 (Aquarius Blue)
1970/71 US 90 (Future Project)
1972/73 US 90 Camo Project (110 Big Bore)
1972/73 US 90 Green
1982 ATC 70
1983 ATC 70 (Ladybug)
1973 ATC 70
1965 Marketeer 3 Wheel Golf Cart with 1986 Honda 250 drivetrain
TF 2015
Other
1983 Honda Z50
Feedback http://www.3wheelerworld.com/showthr...ck-for-coopool
http://www.3wheelerworld.com/showthr...k-for-coolpool
Power User
Roostin Away
put my X on my atv lift, started it up, threw it in 6th gear and wrapped a big scotch bright pad on the axle. Like a lathe, cleaning up all the rust.. looks like chrome! then clear coating it
My rides, 1985 ATC 350X, With legit Lamborghini Countach paint,2003 Harley Davidson FXDL Dyna Low Rider,customised the way I like it!
Check out my build thread of my 350X
http://www.3wheelerworld.com/showthread.php?95389-Tank-s-1985-350X-build-is-FINALLY-all-done!-)
Screw giving away the Harley, It's payed for!!
At The Back Of The Pack
Arm chair racerAt the back of the pack
Nice, I did the same thing to my 250R carrier bearings.... Except mine came out alot harder than that! even with heat..they were completely seized..
85 350X
85 330R
85 250R
86 250R
86 200X
86 200X
AVATAR IS MY OLD 350X
Reply With Quote
