Page 21 of 123 FirstFirst ... 11 19 20 21 22 23 31 71 121 ... LastLast
Results 301 to 315 of 1841

Thread: What did you do with your trike(s) today?

  1. #301
    Join Date
    Oct 2008
    Location
    CT
    --
    41
    I was in the garage putting JB weld on some small pinholes on the 250es tank and was prepping the 200e tank for paint. Also ordered a whole bunch of goodies from DRATV for the 70. Thats my next project once both BigReds are back on the road.
    Past rides
    1982 Honda ATC200E Big Red
    1984 Honda ATC200ES Big Red
    1984 Honda ATC125m (parted out)
    1985 Honda ATC250SX
    2006 Kawasaki Bayou 250

    Current rides
    1985 Honda ATC70
    1985 Honda ATC110
    1985 Honda ATC 125m
    1985 Honda ATC250ES Big Red

    2007 Hammer 110 Chinese wanna-be quad for my kids ( that I occasionally ride wheelies with)



    1968 Buick GS-350 fully restored to factory condition

  2. #302
    Join Date
    Mar 2005
    Location
    overton, PA
    --
    5,257
    i pulled my doughter and ex girlfriend around on the sled with the atc 70, i moved a few trikes around. and made a case saver for the 350x's
    ok here goes, 85 atc70,2 84 atc70's 83 alt50,83 atc110 , 70 us 90 parot green, 85/86 350x garage queen, stock rider 85 350x, project 85 350x 85 250r drag bike, 2 85 250sx's, alt185, , scat tracker?99blaster,85 250r rider,85 250r ice racer project ,93 kx500,99 xr200r, 91 dr250s ,89 lt500 quadzilla,88 lt250quadracer, 88 trx250r race full on race quad,, 01 yamahakodiak400, kawaki kd100,lt50 for my doughters,93 300ex, 230 quadsport, lt185, lt250 quadrunner,84200s, is that enough?

  3. #303
    Join Date
    Dec 2008
    Location
    Zion, IL
    --
    57
    got my '84 225dx running alot better than it did today, need to find a carb kit i believe- the needle likes to stick... then a few little things are also goin on lol- but it finally runs good!! yaaay!

  4. #304
    edog's Avatar
    edog is offline I'm like an Original Gangsta...but a post whore instead. The day begins with 3WW
    Join Date
    Mar 2004
    Location
    New Hampshire
    --
    6,629

  5. #305
    Join Date
    Feb 2008
    Location
    Pennsylvania
    --
    2,305
    Finally put mounting brackets on my 350x swingarm and mounted the skidplate. It is about 10 degrees out here. Took her out for a 30min run. Gotta love Carharts
    Last edited by oldtime3wheeler; 01-17-2009 at 10:47 PM.
    '86 Honda Big Red 250es
    '85 Honda 250sx
    '87 Honda 250sx
    '85 Honda Atc 70
    '83 Honda Atc 70
    '00 Honda Trx 90 (sons ride)
    '07 Honda Recon es (wifes ride)
    atc70/110


    My feedback http://www.3wheelerworld.com/showthr...ldtime3wheeler

  6. #306
    Join Date
    Dec 2008
    Location
    st joe
    --
    143
    it is 13 below 0 to day so i just sat on my trike in the garage and dreamed it was spring
    " 2 STROKE 4 LIFE "
    85 Yamaha tri-z 490 dirt dragger
    86 Suzuki lt 250r (every day rider)
    92 Suzuki lt80 (daughters dirt dragger)
    96 Polaris trail blazer 250

  7. #307
    Join Date
    Jun 2008
    Location
    Lewiston, N.Y.
    --
    1,477
    The swinger came off the sx and the differential came apart.

  8. #308
    Join Date
    Oct 2008
    Location
    NB, Canada
    --
    852
    The last thing I did with my trike was on Tuesday. I had to take off the front tire and put it in my basement because the valve stem was froze. It has been in the
    -20's the past few days, and still is, but it might warm up a bit tomorow, so hopefully I can get the tire back on.
    Rides:
    1985 250sx
    1982 ATC185s
    1984 200es

    Always Hoping For a Maritime Trikefest- http://www.3wheelerworld.com/showthr...s-where-you-at

    "Wear Limits Are Just A Suggestion"

  9. #309
    Join Date
    Jan 2009
    Location
    Oklahoma
    --
    62
    well today i tried getting my 81 250r running but no luck.
    81' Honda 250r
    84' Honda 200x...sold
    84' Honda 200s...sold


  10. #310
    Join Date
    Apr 2008
    Location
    somerset ma
    --
    1,822
    Well seeing that we got about 4 inches of wet snow on top of about 3 inches of ice, I figured I'd take the ole X for a rip.. I wish I could get some action shots but oh well




    The only thing with my land that I ride on is, It's farmed in the summer months so the rows are choppy this year.. Damn Farmers!!!
    My rides, 1985 ATC 350X, With legit Lamborghini Countach paint,2003 Harley Davidson FXDL Dyna Low Rider,customised the way I like it! 1997 GMC Sierra is gone, primary mode of transportation, 2008 Toyota Yaris!

    Check out my build thread of my 350X
    http://www.3wheelerworld.com/showthread.php?95389-Tank-s-1985-350X-build-is-FINALLY-all-done!-)
    Screw giving away the Harley, It's payed for!!

  11. #311
    Russell 350X's Avatar
    Russell 350X is offline Testicles between my toes at the devils backbone Teaching quads a lesson
    Join Date
    Mar 2003
    Location
    Steamburg/Randolph NY
    --
    3,092
    Got my 350X back together, after a mouse made its new home in my intake, had it running, runs good. Had the 125M and 250SX out in the snow playin around. sorry no pics.
    TF 07,08,09,10,11,12,13,14!
    Raffa's IceFest 08, 09, 10,11,13!

    SAY IT!!!!!BUD LIGHTS AND RED LIGHTS!!!!!!

  12. #312
    Join Date
    Oct 2008
    Location
    NB, Canada
    --
    852
    The temperature warmed up a bit today, so I put the front tire back on my 200m after I took it off to put it in my basement because the valve stem froze. I had the motor running for about 30 seconds, just to see how hard it would start with the temp being in the -20's the past few days, it hasn't been running since Monday, and it was about -18 today. It didn't start to bad, but I had to run it on 3/4 choke and it wouldn't idle.
    Rides:
    1985 250sx
    1982 ATC185s
    1984 200es

    Always Hoping For a Maritime Trikefest- http://www.3wheelerworld.com/showthr...s-where-you-at

    "Wear Limits Are Just A Suggestion"

  13. #313
    Join Date
    Mar 2008
    Location
    arizona
    --
    76

    started on the 200x

    new rear axle bearings, new fuel lines, adjusted the cam chain and vales, changed the oil with lucas raing oil, bought a NOS kill switch/light switch, and am going for a ride in a hour

  14. #314
    Join Date
    Aug 2008
    Location
    Internet
    --
    1,251
    More goodies arrived today!!







    Gettin ready for new axle/hubs/wheels/tires/sprockets/chain install.







    Axle up on the workbench.




    wanna see what SHOT splines look like?









    Old hubs that were welded on.
    Last edited by Saul; 01-19-2009 at 10:13 PM. Reason: pics didnt work

  15. #315
    Join Date
    Feb 2008
    Location
    Pennsylvania
    --
    2,305
    Got about 3 to 4 inched today. Came home from work and plowed the driveway with my big red. Never wanted to clear my driveway till I got the plow set-up. Now I cant wait lol
    '86 Honda Big Red 250es
    '85 Honda 250sx
    '87 Honda 250sx
    '85 Honda Atc 70
    '83 Honda Atc 70
    '00 Honda Trx 90 (sons ride)
    '07 Honda Recon es (wifes ride)
    atc70/110


    My feedback http://www.3wheelerworld.com/showthr...ldtime3wheeler

//ArrowChat Integreation Code //