What did you do with your trike(s) today?

**Nick_R_23** · 03-14-2009, 11:02 PM

Thats a big dog!!!

Took my 86 200x out on a ride today, it was pretty warm (~20*) so I threw the paddles on and took off!! I made a thread in the Local Riding section. http://www.3wheelerworldforums.com/s...ad.php?t=95274

-Nick

**Saul** · 03-14-2009, 11:14 PM

Oh fine - don't comment on the 200x front!! Just talk about the dog.

LOL, kidding. The dog is actually my mechanic!!

**Nick_R_23** · 03-14-2009, 11:19 PM

Haha, ok then, front end looks good! What front fender are you planning on running?

-Nick

**Saul** · 03-14-2009, 11:28 PM

Originally Posted by Nick_R_23

Haha, ok then, front end looks good! What front fender are you planning on running?

-Nick

86 250R front fender - just like NOS stickers on a ricer, it will give me 10 more MPH of top speed.

**Chaps80** · 03-15-2009, 07:26 PM

The snow finally melted enough so I was able to take the 225dx out for a ride on the trails today. First trail ride of the year!!!

**oldtime3wheeler** · 03-15-2009, 07:43 PM

Just pulled all the boys out and rode them around the yard for awhile

**brapp** · 03-15-2009, 08:12 PM

i drained allthe gass otu of everythign i won and ocoate dthe insid eof the tanks because as it looks i am not gonnabe ridign for along time.

**85200xrider** · 03-15-2009, 08:45 PM

well after i fished the valve adjusting screw out of my cylinder head....i re-sealed that all up....readjusted my valve....seem fine now

got bored and polished my cdi cover, valve covers, timing mark and crankshaft hole caps. Then took my kick starter cover off to figure out why my kicker likes to hit the ground....couldnt see anything worn out so i put that back together.

im thinking tomorrow i might polish up my left crankcase cover....but not sure

**Dave's1985200X** · 03-15-2009, 08:54 PM

I finished taking a couple of more bolts that snapped out, got the exhaust back on, switched over to the nice seat and changed the oil!!! I am also going to media blast both skid plates and repaint them this week(found a media blaster at work.........who knew!!) Oh yeah.....and fired it up after the oil change... ca't wait, it's getting close.

**MonroeMike** · 03-15-2009, 09:06 PM

Started assembling the rear end of one of my Yamaha's.

**buck** · 03-15-2009, 09:27 PM

Installed a new footpeg mount that was bent on my 350X when I purchased it. Now I need to get off my rear and get the tank done so I can get this barn find up and going.

Buck

**Saul** · 03-16-2009, 09:58 PM

Grinded off my steering stops today. Mucho better now homies!!

**aldochina** · 03-17-2009, 12:00 AM

took the bigred out for a ride, nice combo of mud,snow, and ice, good times. A little harry going down some of the steep icy trails, whatever you do stay off the brakes!!!

**1985BigRed250ES** · 03-17-2009, 01:38 AM

got the frame, forks and headlight bucket painted. waiting on the motor to get finished, and still cleaning parts. now I need to get bearings and seals for the front axle a new brake cable, brake lever and mounting hardware. still got a ways to go lol

**gizmo_22** · 03-17-2009, 02:01 PM

What i did today was go mining for 200x's lol, more specifically my 185autox as you can see it was deeeeeeeep... it was covered at the start of winter, but it somehow is missing its cover

Anyways all is well, theres a little surface rust on the forks i need to clean up and the tune up stuff, but couple pulls and she was purring like a 185 should lol. Sorry about the pics, they were taken with a cell phone.

As you might notice the handlebars sticking out on the left side of the pic, thats the 185s, awaiting a new wiring harness for it. and not in the pic is a cr250 COMPLETLY burried... sigh I'm tired of shoveling.

Thread: What did you do with your trike(s) today?

Thread Tools