Well, I finally got around to getting the M put back together. Freshly painted forks, tank and decals and Maeir front fender. Still waiting on some rear fenders. Here's how it looked when I got it a few months ago and how it sits today.
New to the board
Arm chair racerNew to the board
Well, I finally got around to getting the M put back together. Freshly painted forks, tank and decals and Maeir front fender. Still waiting on some rear fenders. Here's how it looked when I got it a few months ago and how it sits today.
Power User
Teaching quads a lesson
My daughter, son and I rode our machines on the Iron Horse Trail. See pics in the open forum. I should have put them here.
Trikes
1970/71 US 90 (Aquarius Blue)
1970/71 US 90 (Future Project)
1972/73 US 90 Camo Project (110 Big Bore)
1972/73 US 90 Green
1982 ATC 70
1983 ATC 70 (Ladybug)
1973 ATC 70
1965 Marketeer 3 Wheel Golf Cart with 1986 Honda 250 drivetrain
TF 2015
Other
1983 Honda Z50
Feedback http://www.3wheelerworld.com/showthr...ck-for-coopool
http://www.3wheelerworld.com/showthr...k-for-coolpool
Roostin' Away
Arm chair racerRoostin Away
Dropped my cylinders off to get mic'ed/check the end gap. My quad cylinder looks horrible, found it in a parts bin I had. Then I spent 30 minutes on eBay and EVERY over-sized piston is 12:1!!!! Nothing is less, what the hell???
New to the board
Arm chair racerNew to the board
Tightend up the tree, swaped out the champion spark plug for a ngk, and tried to get the spark arrestor off but it seams to be rusted solid.
Next up will be a oil change - rotor cleaning and tighten the drive chain up some.
Power User
Teaching quads a lesson
I proved my friends wrong about my 26 year old machine, and fired it up first kick.
LED obsessed
2015 Yamaha FJ-09
New to the board
Arm chair racerNew to the board
I came home after a week vacation to find a flat rear tire....valve stem is all loose and needs to be replaced....popped the tire off tonight and will have it repaired tomorrow
'82 Honda Big Red 200ATC
First Time Rider
Arm chair racerNew to the board
I fired up the trike this morning with the new top end that got porting from Jason Hall. I also put on a set of 450r pegs.
Registered User
New to the board
Painted my '84 200 E-Shaft! - looking for a replacement exhaust, anyone have one?
New to the board
Arm chair racerNew to the board
painted mine also .
http://www.3wheelerworld.com/attachm...hmentid=108193
Last edited by lee s; 11-09-2010 at 02:27 PM.
Power User
Teaching quads a lesson
Shined up my T3's exhaust, pulled the X and 110 out and got a group photo. Then went out and raced my X around for some circuits. Going to have to repair my 110's seat latch, it broke
LED obsessed
2015 Yamaha FJ-09
At The Back Of The Pack
Arm chair racerFirst time rider
put brand new lugnuts on it a couple days ago. take em off today to put valve stems in the wheels, the new lug nuts strip and or shear EVERY SINGLE STUD.
At The Back Of The Pack
Arm chair racerAt the back of the pack
Took the new hub for my almost ready YTM200ER, put it on only to discover the dude killed the axleing it out. Jerk! So off to the machinist, then home for it's first real ride after Assembly. It was rolled (not by me), killed the front hub and axle. Had a 22" from a YTM200 chain on the front with a made to fit hub. Bad stuff, no front breaks, scary. One quick ride and then apart for repairs she came. Report on the first real ride later today. I hope.
Edit: no ride today, must wait till tomorrow to get my axle back.
Last edited by CanadianThomas; 11-09-2010 at 07:40 PM. Reason: update
85 Honda 200x, rider build almost complete, need aftermarket rear shock.
85 Honda 250es, with some work to do.
Roostin' Away
Arm chair racerRoostin Away
Brought my 82 R home to strip down and start working on it, finally.
Got The Holeshot
Arm chair racerJust too addicted
Put knobbies back on the 350X, drained the fuel, attached the rear garnish.
Exchanged the black footpegs for the chrome ones on the Keeper 200X
Loaded them all in the trailer for a trip to the desert this weekend. Beautiful weather in the 70's with a little wind though.
Picked up a 350X frame from the welder yesterday, ready for another build.
Getting a helicoil kit so the XR500 motor can be finished and put in Nick frame.
Have '85 350X-XR500 Hybrid,
Had Nicholson framed: 90/110, 185s, Gen I 500, Gen II 500
Had Bandito Framed 90
Have Vey's Framed 90
Have too many parts
Just Too Addicted
Arm chair racerJust too addicted
i tried out a new trail. I managed to bend my shifter around my foot peg. Then going down a hill a stick jammed between the shifter and peg putting the bike in neutral. I have no breaks and it was a very steep hill. So now i need a new shifter and will be putting breaks on this weekend.
Reply With Quote