Just Too Addicted
Arm chair racerJust too addicted
Put better tires on my 110KLT off the doner bike I bought. Sitting and looking at the new top end in my engine that is on my bench waiting on the other parts to come in so I can get her all together real soon.
Has anyone ever made a hard tail bike into a suspended rear? I would like to make a 110 Tecate.
Got The Holeshot
Arm chair racerJust too addicted
Put the carb back together on the AutoX, took the old seat cover off and getting ready to replace it, Kreemed the tank for the same trike and should be ready to set back up tomorrow. Figured to go with a center single cable pull round slide carb for the Gen I trike.
Just Too Addicted
Arm chair racerJust too addicted
sealed my new intake boot and rewired my cdi box and bought a complete gasket kit and axle bearings with seals for $30! win!
1985 Kawasaki Tecate 250 with kx 500cc motor
1985 Honda ATC 70 custom built with lifan 125cc
1985 Honda ATC 70 custom powder coat slight mods
1985 Honda 250sx
Yamaha zinger 90cc 2 stroke
1985 Honda 250sx custom green and black build
1985 Honda 200x
Just Too Addicted
Arm chair racerJust too addicted
set in my new rebuild and hooked up the exhaust. Waiting on a part or two so I can fire her up. But atleast I am working away
Got The Holeshot
Arm chair racerJust too addicted
Thumper Mutt needs a new frame, too many cracks, tinking I've got a chrome moly hanging around somewhere
Power User
Roostin Away
Stared at our bikes in the basement... im getting that itch for another ride!!
Just Too Addicted
Arm chair racerJust too addicted
Stared at my Bike waiting on that part I am missing......... Gaaaaaa I want it up and running again.
Just Too Addicted
Arm chair racerJust too addicted
Pulled 3 of the 70s in and put thier new points in. Got them all running good. Noticed on the last one that the frame was a little bent so I fixed that. Then decided to make a new steering stop for it. Pulled the forks out so I wouldnt cook the bearings welding it on, then decided the forks needed sanded and painted.Now the whole thing is in a hundred peices. Another project I was not planning on doing. I admit I have a problem.
New to the board
Arm chair racerNew to the board
I think your just a little more motivated then I am.Originally Posted by racer....X
Roostin' Away
Arm chair racerRoostin Away
just took the Zinger out for one more last ride and changed the fluids, double checked all the nuts and bolts, adjusted throttle limiter and filled it with gas and 2smoke oil. taking it to my brother tonight, can't wait to see the look on my nephews face on Christmas day. wish i could be in his shoes.
74 HONDA ATC 70
85 HONDA 125M (undergoing surgery)
85 YAMAHA YT60 red w/yellow trim (sold, still in the family)
"What the f*** are you doing Bill? The racetrack is no place for snacks and fancy cakes....
I'll have a Custard Cream if your asking."
Got to love that search button. Faster then a liquid R.
Power User
Roostin Away
Today was a very busy day.Installed new forks on the 350x after replacing seals.Removed the trees and greased up all those little bearings.New front wheel bearings.The worst job was removing the nuts for the exhaust header.I figured since everything was out of my way might as well do it now.Took my time and was in no hurry.With the torch and patience all went well.Should have took a picture of how rusty things were.The motor is coming out for new valve seals and a clean up.
Last edited by jays375; 12-24-2011 at 01:37 PM.
Power User
Lord of the trike
Took the front wheel off the 87 BR to mount a dirt devil on it. Also dug up all my 90 110 parts and started reorganizing them. Damn near 20 big boxes full.
R.I.P. John Swinehart
TRIKEFEST 11, 12, 13, 14, 15, 16, 17, 19
Epic Mikfest 17
86 200x
85 250sx
85 big red
85 atc 70
Fabiodriven- cereal goes in first, then milk.
I’ve got an 8” Grip on a 10” turd... Kyle Kiser
Got The Holeshot
Arm chair racerJust too addicted
I looked at my R and asked it why the fmf and psi pipe dont fit on my big bore motor very well.
]1986 ATC 330R
1985 ATC 250R vintage PSI racing ported motor
Get your replacement ATC 250R decals and custom Big Bore #'s here http://shop.3wheelerworld.com/catego...=2&pagegroup=1
Power User
Roostin Away
Put the freshly painted exhaust back on the 125M I'm getting ready for my daughter. Of course now that the nice looking exhaust is on, the frame looks oh so nasty and its taking all my self control to not have the thing in a million pieces and start sending parts out for powdercoating. I popped a new battery in it, fiddled with the carb a little and tore some odds and ends off for cleaning. Once the new bearings, brakes, and what not show up it'll get wrapped up and left alone (for now) so she can play on the ice if we get any this year. You can bet your arse that dad will be playing with it too.
John
1985 Eddie Sanders ATC330r
1986 Monstecate
1984 ATC70 (awaiting 125cc transplant)
1984 ATC125M
1986 GSXR 750 - Keepin' it old school!
1999 Arctic Cat 500 4x4 plow machine
1999 Arctic Cat Thundercat 1000 (lake lizard)
1996 Arctic Cat Jag 440 L/C (ditch banger)
Just Too Addicted
Arm chair racerJust too addicted
*sigh* still waiting on that part for the carb so I can start-up my new rebuild.... Well and made a killer deal on a new aftermarket exhaust..... Thanks again to that great member.... Other then that staired at my 3 wheeler in hopes of enjoying it soon......
Reply With Quote