At The Back Of The Pack
Arm chair racerFirst time rider
i just receive my new rear bearing carrier for my 85 ATC 250R restoration project. I have buy an aftermarket bearing carrier on EBAY (Double row bearing with aluminum carrier H-2) but it seem that this kind of carrier don't have the groove for the bearing holder O-RING....is it normal...i don't need to put this kind of O-RING with an aftermarket carrier?
someone can help me with this?
thanks
My rides:
86 YAMAHA TRI-Z
85 HONDA ATC250R
Power User
Catch me if you can
I like the orings in the OEM carriers but guys don't use them with the aftermarket carriers...
All our government does is distract us while they steal from us, misspend our tax $ and ruin our country
At The Back Of The Pack
Arm chair racerFirst time rider
ok, is it OK without the OEM o-rings?
My rides:
86 YAMAHA TRI-Z
85 HONDA ATC250R
Check my feedback before buying from me
Catch me if you can
o rings?? they have O rings??? lmfao!! ive never had a carrier with O rings!! yea... you'll be aight!
At The Back Of The Pack
Arm chair racerFirst time rider
the OEM carrier have grooves for O-ring..but not the aftermarket one...
My rides:
86 YAMAHA TRI-Z
85 HONDA ATC250R
Power User
Teaching quads a lesson
I have all aftermarket ones, none have grooves for o-rings. You'll be fine, just put some anti-seize on the carrier before you put it in the swingarm and if you ride in some nasty stuff, give it a turn after you wash it.
At The Back Of The Pack
Arm chair racerFirst time rider
thans for the hint.
My rides:
86 YAMAHA TRI-Z
85 HONDA ATC250R
Reply With Quote