Look at this picture and tell me what you see different on this bike.
http://i267.photobucket.com/albums/i...g?t=1203976304
Got The Holeshot
Arm chair racerJust too addicted
Look at this picture and tell me what you see different on this bike.
http://i267.photobucket.com/albums/i...g?t=1203976304
Airfoolers RULE!!!
New to the board
Arm chair racerNew to the board
No pipe? lol It looks like it might be shortened?
84 200x
250r rear rims, Super trapp .
84 Big Red
Cobra exhaust, Uni air filter.
I'm 4 wheels? son.
Got The Holeshot
Arm chair racerJust too addicted
Other than not having a pipe, the swingers stock also.
Airfoolers RULE!!!
Power User
Lord of the trike
Big Bore cylinder, but is it the hondaline 300 or one of the Mugan kits?
1984 Yamaha YT 60 Tri Zinger(current project)
1983 Yamaha YTM 200 (rear suspension kit)..... long term project
2004 BMW R1150R
1972 Honda CT 70
2007 Lifan 110
Got The Holeshot
Arm chair racerJust too addicted
It's a bigbore but its neither mugen or hondaline.
Airfoolers RULE!!!
Power User
Lord of the trike
So did someone get a Odyssey top end to fit? Or maybe this is that mystery cylinder you have (I forget what it is).
1984 Yamaha YT 60 Tri Zinger(current project)
1983 Yamaha YTM 200 (rear suspension kit)..... long term project
2004 BMW R1150R
1972 Honda CT 70
2007 Lifan 110
Got The Holeshot
Arm chair racerJust too addicted
It's an odyssey 350 cylinder I found this pic on .org awhile back, they must not have been able to get the pipe to fit with those massive fins it's a tight fit already.
Airfoolers RULE!!!
First Time Rider
Arm chair racerNew to the board
I gotta say its a FL350 top end on it by the looks to me.
Trikes
86 250R
82 ATC70!
Previous Trikes
85 TRI Z
86 200X
87 200X
First Time Rider
Arm chair racerNew to the board
Seems ya beat me too it lol
Trikes
86 250R
82 ATC70!
Previous Trikes
85 TRI Z
86 200X
87 200X
Administrator
The day begins with 3WW
that cylinder looks HUGE in that bike. I picked up on the size right away!
RIP - Yamahondaman!! You will never be forgotten!
RIP - Sam Brehm!! Gone but NEVER forgotten!
RIP - Sandpuppi101 - You will live on in my mind - I miss you friend!
First Time Rider
Arm chair racerNew to the board
How much work is it to get the FL top end on a fooler like that? My high school has 3 brand new 350's like that just sitting there. Its basically the hole motor but the bottom end is missing a lot of stuff, counter balancers ect.. Basically everything you need to make it work for the odessey wasnt included when honda sent them way back then to the shop. They didnt want them used or made to be put back into the machines. My shop teacher made me an offer if I built a project he needs made that I could take one or two home when the year is done. But how hard is it to make it work with a fooler?
Trikes
86 250R
82 ATC70!
Previous Trikes
85 TRI Z
86 200X
87 200X
Got The Holeshot
Arm chair racerJust too addicted
It's not mine though just a pic I found on .org.Originally Posted by motoman110
Airfoolers RULE!!!
Check my feedback before buying from me
Roostin Away
If you have access to the cylinders and heads I would like to purchase one for my NOS Odyssey
Got The Holeshot
Arm chair racerJust too addicted
Your cases have to be bored to accept the sleeve and it will bolt right on but then you'll need to stroke your crank about 4mm or take about 2mm off of the cylinder.
Airfoolers RULE!!!
New to the board
Arm chair racerNew to the board
i just got my cases back for the machinest for this very idea( sorry no pics yet) dose anybody know some place that strokes cranks? i really want it to be the 68mm insted of cutting down the cylinder.
Reply With Quote