Results 1 to 5 of 5

Thread: My head light dosent work anymore?

  1. #1
    Join Date
    Apr 2008
    Location
    lynchburg
    --
    29

    My head light dosent work anymore?

    I cant get my headlight working ever since i went over backwards on a steep slope and broke a little piece of plastic in the switch on my head.

    I got a K&S TRX type switch. It is the same but has a starter switch.

    The original is a 5 prong, this one has 1 6 prong plug and 1 3 prong plug.

    I am confused on where to put all the wires. I have all but two in the 5 prong in place, the white with yellow stripe and the pinkish wires.

  2. #2
    Join Date
    Jul 2004
    Location
    Pride, Louisiana
    --
    286
    I would recommend studying a wiring diagram.
    1977 ATC 90
    1983 ATC200E Big Red
    1985 Heald Super Bronc VT-10
    1999 Bayou 220
    2007 Polaris Outlaw 90

  3. #3
    Join Date
    Apr 2008
    Location
    lynchburg
    --
    29
    my clymer has some but the wires in ? are not there.

  4. #4
    Join Date
    Jul 2004
    Location
    Pride, Louisiana
    --
    286
    I see the problem. My only other suggestion is, if you have a volt-ohm meter and trace out each wire. Without physically looking at it I'm not sure what else to say.
    1977 ATC 90
    1983 ATC200E Big Red
    1985 Heald Super Bronc VT-10
    1999 Bayou 220
    2007 Polaris Outlaw 90

  5. #5
    Join Date
    Apr 2008
    Location
    lynchburg
    --
    29
    Any one know what them wires are for??

//ArrowChat Integreation Code //