I jst rewound my pull start for my 200s Now that was a little bit of a pain until I figured it out. My learning curve was abouot 2 hours! lol!
At The Back Of The Pack
Arm chair racerFirst time rider
Wow just rewound my pull start
I jst rewound my pull start for my 200s Now that was a little bit of a pain until I figured it out. My learning curve was abouot 2 hours! lol!
At The Back Of The Pack
Arm chair racerAt the back of the pack
After you do it a few hundred times it becomes instinct. LOL
1977 ATC 90
1983 ATC200E Big Red
1985 Heald Super Bronc VT-10
1999 Bayou 220
2007 Polaris Outlaw 90
Aspiring romance novel cover model, and the Official 3WW slayer of thieves and swindlers.
Catch me if you can
God, pull-start rewinds have to be the most trying and nerve-racking jobs ever. I hate doing that!
85 Tri-Zinger 60
85 ATC250SX
86 ATC250SX
87 ATC250SX
02 XR650L conversion
84 ATC 480R
At The Back Of The Pack
Arm chair racerFirst time rider
This is the one I rebuilt wish it looked like the one in the picture took me 20min just to wash up! but now I know how to do it so my assy time should be cut in half next time.
Roostin' Away
Arm chair racerRoostin Away
i don't evny your trouble at all. I had a 185s that we gave up on for a while. We took off the pull start and used a drill to start it. In the woods we would either pull start it or bump start it. We finally gave in and figured it out and lots of anger later....we figured it out.
Anyway, stay practiced at it because you will do it again.
At The Back Of The Pack
Arm chair racerAt the back of the pack
As long as the spring stays put it ain't bad.
1977 ATC 90
1983 ATC200E Big Red
1985 Heald Super Bronc VT-10
1999 Bayou 220
2007 Polaris Outlaw 90
Power User
Roostin Away
Had to do it one time on my ytm-200e. Wish it was the last time. It was a couple of years ago and I didn't know how a recoil was working. Trust me, after half a hour you know that the spring should stay in the groove.
1984 Yamaha YTM-225DX
1985 Tri-Z 1985 Tecate 1984 Tri-Zinger and 1986 ATC250R projects
Yamaha 3-wheeler owners club Join now!
Official 3WW Yamaha 3-wheeler owners group
Québec 3-wheeler riders group
At The Back Of The Pack
Arm chair racerFirst time rider
LOL! You Got That Right!
Power User
The day begins with 3WW
weeeee! good times!
yea i had to rewind my 200E, 200S, 185S (still working on the decompression cable part for the wifeypoo cause she's a wuss) and now i got 3 or 4 more to do with the pile of parts i got. :/ maybe i shoudl fixor them and sell them repaired and working to pay for parts i really need. rewind service for $40+ parts sound fair?
________________
I'm just a squirrel "Trying" to get a nut!
Nearly every kind of Honda ATC (plus some custom ones
several Yami Quads (mostly custom built for MX racing)
https://www.mikesatvfix.com
"Freedom is not free...but the U.S. Marine Corps will pay most of your share."
Power User
Teaching quads a lesson
haha i honestly have do it so many times now i can take one off...rewind it...and put it back on with no tools othere then a 8 millimeter socket and rachet and can do it in about 15 to 20 mins
current rides
82' ATC110
85' ATC310R
85' ATC250R
85' ATC250ES
16' brute force 750
At The Back Of The Pack
Arm chair racerFirst time rider
I have to rewind mine on my honda 200... God i am not looking forword to that lol
Just Too Addicted
Arm chair racerJust too addicted
Its not bad at all once you figure out the right way to do it and practice a litte. Including winding the spring, I'm guessing I could have mine together within 15 minutes on my 200s. What part are you guys having all the trouble with?
current rides:
05' 400ex
02' yz85
84' 200es big red
84' 200s with tlr200 engine project (almost done)
84' atc 110
83' 225dx with 340cc kohler sled engine
At The Back Of The Pack
Arm chair racerFirst time rider
The scar on my middle finger reminds how not to take the spring out.
1984 200s
1984 big red
1980 Kawasaki Invader 340 liquid
1993 GMC sierra, 4.3L automatic
1990 Chev Scottsdale -parts
1989 Chev wrangler 4.3L 5 speed- parts
Chevs are for parts GMC's are for driving
At The Back Of The Pack
Arm chair racerFirst time rider
Yeah everytime I was holding it coiled up my nerves were high just waiting for it to shoot off somewhere. Next time i'm wearing saftey glasses.
Just Too Addicted
Arm chair racerJust too addicted
If first you hook the outside of the spring into the housing, then you just work around and around with the spring until its all in.
current rides:
05' 400ex
02' yz85
84' 200es big red
84' 200s with tlr200 engine project (almost done)
84' atc 110
83' 225dx with 340cc kohler sled engine
Reply With Quote
