My 84 Big Red will start on the first pull, run for about 5 seconds, then die. After that I can't start it again. I think it is flooding. Would that be the float valve?
My 84 Big Red will start on the first pull, run for about 5 seconds, then die. After that I can't start it again. I think it is flooding. Would that be the float valve?
Honda
86 350X - Full Restomod
85 250R - Legend
85 Big Red - Clean Original
85 Big Red - Custom
Not Honda
85 Yam Badger 80 - Kids
99 Pol Sport 400 - Got it FREE
If it is the float, after it sits a little while with the gas on, gas should come out of the carb and/or overflow hose. I could also not be getting enough gas. The float could be sticking up, and not letting gas in quick enough.
Rides:
1985 250sx
1982 ATC185s
1984 200es
Always Hoping For a Maritime Trikefest- http://www.3wheelerworld.com/showthr...s-where-you-at
"Wear Limits Are Just A Suggestion"
the carb could be dirty or fuel filter clogged.
________________
I'm just a squirrel "Trying" to get a nut!
Nearly every kind of Honda ATC (plus some custom ones
several Yami Quads (mostly custom built for MX racing)
https://www.mikesatvfix.com
"Freedom is not free...but the U.S. Marine Corps will pay most of your share."
Next time it does it pull the spark plug out immediately and see if its wet. If its dry you are running outta fuel. Clean the petcock and take the carb apart and clean every part real good.
The person who says it cannot be done should not interrupt the person who is doing it.
Rides
85 ATC350X
85 ATC200X
My Feedback http://http://www.3wheelerworld.com/...-for-Erics350x
Just replace it... a worn needle can stick open or shut...