Check my feedback before buying from me
Got the holeshot
Been lookin through rocky mountain atv's site, and I came across a company called Tusk. They have many budget parts, one being a clutch and spring kit for an 85 250R that runs for $35. That's about 1/2 to1/3 the price of other clutches, I'm just wondering if it's worth that for a weekend warrior, (more like monthly), or if it's just a complete waste.
Current Rides-Soon to be 85 350X, 84 200X
PastRides
86 250SX 85 Tri-Z (yellow) 85 Tri-Z (silver) 86 200x 01 Blaster 99 Blaster 85 ATC250R 86 ATC250ES 84 Tri-Zinger 60 ATC500R Project
Originally Posted by atctim
I prefer to be called a "3 wheeled American" I find the term "Trike People" very offensive and derogatory!SOON MY PRECIOUS!
At The Back Of The Pack
Arm chair racerFirst time rider
I have heard nothing but good things about them.... go for it!
My rides
MINT 1986 bw 200
Power User
Got the holeshot
I have heard that they were a good deal too, other than the springs being kinda weak.. My friend had one in his CR250, It seemed to work just fine
Last edited by cr480r; 12-14-2008 at 04:37 AM.
Just Too Addicted
Arm chair racerJust too addicted
Like you, I asked around about if they worked or not. Could not find the answer I was looking for.
So I bought the kit and installed it on my 350X. Let me tell you the kit works.
And for that amount of money they can last a few rides and still be a deal. I'm beating the hell out of this clutch kit and they are doing their job. It was important to me that it was user friendly, like the stockers. And these are.
I always leave then in oil overnite, do the same with any type of bike clutch (exept some Ducatis).
Get em. Hope this helps.
TORKER.
Last edited by torker; 12-14-2008 at 09:05 AM. Reason: error
THOSE WHO SAY IT CANNOT BE DONE, SHOULD NOT GET IN THE WAY OF THOSE BUSY DOING IT...
New to the board
Arm chair racerNew to the board
we run the plates and discs in all our high HP stuff, 75-100hp with no problems, we do use lock up clutchs and stiff springs tho
Power User
Got the holeshot
got a kit for the 87 quadzillla i own, no problems here in three years!
1985 With "86" Plastic's,Custom 12" Alluminum Extended Swing Arm,39MM PWK,"TRX" Filter,9 Paddle TALLER HALLER'S on 11" Wide Rim's,LOT'S of Stainless,LOT'S of Alluminum,LOT'S of PowderCoating,NOTHING Stock..
FASTEST Tri-Z on The Planet...MAKE A NOTE !! and the SECOND FASTEST, WRITE IT DOWN AGAIN!!!
At The Back Of The Pack
Arm chair racerFirst time rider
I run Tusk clutch plates in my Rm125 and Ive had no problems
Last edited by Derek; 12-15-2008 at 11:26 PM.
1985 Honda 200x
- 30mm Carb
- DG Exhaust
- Rear Wheel Spacers
- K & N Filter
Check my feedback before buying from me
Got the holeshot
Well tusk clutches it is, more money for improvement elswhere. sweet.
Current Rides-Soon to be 85 350X, 84 200X
PastRides
86 250SX 85 Tri-Z (yellow) 85 Tri-Z (silver) 86 200x 01 Blaster 99 Blaster 85 ATC250R 86 ATC250ES 84 Tri-Zinger 60 ATC500R Project
Originally Posted by atctim
I prefer to be called a "3 wheeled American" I find the term "Trike People" very offensive and derogatory!
Reply With Quote
