200x Decompression lever mod??

[Dizzo]

For sure, nice Pics. I wouldn't be able to use the praking brake as I have use that for a hand brake, since all I really use it for is stunting.

Howdy, what price could you give me shipped to 49240?

If I was to get these new parts to make the started work, I would probably be willing to take your goki starter off your hands to put on my friends 200x. and I would have some stock parts laying around.... stock stator, stock valve cover... ya know?

[big schott]

It's actually the parking brake cable that is attached to the clutch lever. They put a u in it and ran it back to the decompression release.

This is a good idea.

PS: do you still have the batt. box and acces.?

[greenhuman]

So here's what I need?

Ebay head

I saw another, with the head for $150. But i dont know what a good price is for just the valve cover, or maybe someone here has one for a good price...

That rocker cover is the one you want. They seal a little differently near the outside cam journal but it is not a problem. Same specs on the rockers as your 200X. Adjust your valve clearances and go riding.

[dcreel]

Yes, I still have it all. It worked fine. The battery box itself is a homemade job that bolts between the rear grab bar bolts under the seat. Attached to the battery box is the starter relay. I'll get pics up. The 200X also came with a white fairing that bolted to the handlebars. I've since taken that off as well.

[Dizzo]

well Howdy is trying to find me one so i may not need the eboy item. Thanks for the info, I'm pretty excited about getting the Goki to work.

I ended up mounting the battery box under the left rear fender. even if i bottom out, it doesn't hit anything. but it certainly doesn't look as trick as if it wear under the tail...

you can see it here

[rugabugadouglas]

too bad you couldnt hook up a cable like on the xr200 bikes so when you kick it it hits the compression release or the start button either one would be sweet i woyuld do that then since the 12:1 is hard to kick or use the goki on for me

[Dizzo]

i Might Hook up a solenoid to it. once i get the new valve cap, I'll have an idea what i can work with. End Product = Jump on, and hit start!!

[Howdy]

i Might Hook up a solenoid to it. once i get the new valve cap, I'll have an idea what i can work with. End Product = Jump on, and hit start!!

You have a PM!! If your thinking if hooking up a solenoid you might want the cable style lever, other wise you will want the manual lever. It don't matter to me because I have both styles available.
Howdy

[84honda200s]

hell if i have a head i could beat that deal to death.