Tri-moto 175 front end

**Vealmonkey** · 02-08-2009, 01:54 AM

We'll work it out. And in that third set of pics, that red and metal thing on the black and white card. That is a NOS aftermarket Pro Tec chain tensioner for a yt175, very rare. I won't be needing it on a suspension yt175. So After you get your box of parts, I'll be listing some NOS yt175 parts. Time to clear out some things and build up a little capital to finish some projects.

**old-yellow** · 02-08-2009, 01:59 AM

Nice by the way how is your YT175 coming a long? I am just curious but why are you not using the Nos parts on your trike?

Thank's, Alex

**Vealmonkey** · 02-08-2009, 02:19 AM

Don't worry, I am using nos rear fenders and seat, nos rear grab bar too. But the chain tensioner won't work with the Pro Tec kit. And I'm not using a stock yt175 front end so none of the stuff on the front forks will work for me either.

**old-yellow** · 02-08-2009, 08:37 PM

Hey Pat, I have a question about that protec chain tensioner. Does that fit every year or only 80-81 trimoto's? I know that 82-85 trimoto's have the plastic cover over the chain and sprockets and use a different chain tensioner than the 80-81 trimoto's. Also I was curious what you wanted for it if you want you can PM me with that answer.

Thanks, Alex

**Vealmonkey** · 02-08-2009, 08:50 PM

I'm pretty sure the chain tensioner is for the 82 and later yt's. I can pull the instructions out and check though. I have to tell you the chain tensioner wouldn't be cheap.

**old-yellow** · 02-08-2009, 08:55 PM

That's cool I was just curious.

Thanks, Alex

**old-yellow** · 02-09-2009, 03:10 AM

I just wanted to post a picture of the shock boots that I am going to buy when I Build my 3 wheelin fund back up.

**old-yellow** · 02-10-2009, 06:08 PM

Originally Posted by Vealmonkey

And here is the last pic or 2. Do all these parts work for you. The grab bar might have a slight up bend to it but not bad. I threw in some pictures of the NOS parts that you didn't want just to fill up the empty attachments. Let me know that the parts are to your liking and I'll start and get your box packed. Also re-pm me your mailing address. Hopefully you'll see these parts by this coming friday or saturday. Don't forget to let me know when they get there and we can work out a deal and I'll know what all the shipping and stuff is.

Hey, Pat this is the post I was talking about.

Thanks, Alex

**TriMotoMan** · 02-19-2009, 02:59 AM

awesome parts, wish i could find some here in alaska

Thread: Tri-moto 175 front end

Thread Tools