will thos bolt into a 200e frame?

[oscarmayer]

http://cgi.ebay.com/ebaymotors/HONDA...Q5fAccessories

it's a chain driven 300ex motor!!!!!! will it fit my 200e frame? it's got starter and such with it.

dudes, if that bolts into a 200x frame or a 200e frame, then sweet!!!!!!!!

[factoryX]

??? they are chain driven, they are about the size of a 350x motor. there is a kit bolts a 350x motor to the 300ex sport trax.

[factoryX]

look for CRF230 motor, best upgrade you can get, they have the same motor but this one is new and has about 8-10 more hp.

[oscarmayer]

i'm trying to find the best power for my 200e bigred. i am looking for any upgrades possible. carb, complete motor swaps. i spend $800 onthe top end and yea it rocks, but i'm concered about pulling at higher altitudes. it may need more umph. the good thing is the work i did will sway to any 200cc 4stroker trike, so i could always sell the top end or even the whole motor since it works flawlessly to get some $ for a bigger motor.

what do you guys think would be the best performacne drop in that will be also the simplest one?

maybe i'm dreaming i don't know. but would be cool to get one of these bigger motors into a trike to see what it does.

[rdlsz24]

I would go 300ex just for the abundance of them. They have been made since 1993 and are all chain driven. I have no idea if they will bolt into a 200 style trike frame but anything can be done right?

Rob

[factoryX]

the 300ex motor is based off the 350 motor, it like sticking a 350x motor in a 200x...

[oscarmayer]

^ will it work or is it possible? i know i'll have to fab some custom engine mounts, but I'm wondering if the linkage for the chain will light up correctly. if so.

[Blown 331]

I'd like to try putting a 250x motor (same as 300ex minus starter & 50cc) in a 86 ATC200X, I already have the doner bike.

[DeePa]

i told you to get a bigger bike rather than try to soup up a 200...

300ex motor is kinda big for that chassis...

id look at picking up an sx...what are you using the trike for?

[SYKO]

i told you to get a bigger bike rather than try to soup up a 200...

300ex motor is kinda big for that chassis...

id look at picking up an sx...what are you using the trike for?

X-everything he said

a 250es or sx is a vast improvement over the 200 even then swaping in a 300trx motor is easier then swaping in a larger motor into the 200 chassis.

[DeePa]

how do you x-out what i say then say basically the same thing?

i said get an sx, you said get an sx and put a 300 in it....and the 300 is too big for the 200 chassis...

[Blown 331]

how do you x-out what i say then say basically the same thing?

i said get an sx, you said get an sx and put a 300 in it....and the 300 is too big for the 200 chassis...

He wasn't X-ing it out, he was agreeing like times 2.

[DeePa]

toucheeeee

[oscarmayer]

u know just because you guyws tell me it's not, now you gone and done it. I'm gonna have to do it just to prove it can be done... (time to find a doner 200e frame)

[DeePa]

well tell you so you dont waste your time when there are better options out there for less money...