That is awesome!! Were the triples custom made, or cr60? Did you use the stock zinger front tire and wheel?
Just awesome, gives me ideas.. hmm..
thank you.
Power User
The day begins with 3WW
That is awesome!! Were the triples custom made, or cr60? Did you use the stock zinger front tire and wheel?
Just awesome, gives me ideas.. hmm..
thank you.
Rides:
1986 ATC250R (sectional pipe and Klemm Research silencer)
1986 ATC250R (Desert Bike, WAX-ON seat, Dual Cibie lights, Steering Stabilizer)
1979 ATC110 (Bandito frame and forks, Turbo wheels, disc braked)
1982 ATC70 (Lifan manual 125)
1987 LT80 (piped, widened)
My feedback thread
http://www.3wheelerworld.com/showthr...ack-for-dcreel
RIP Trace.. Godspeed.
Power User
Roostin Away
Yes I built custom Triple's, for the stock 84 CR60 forks. I used all the zinger wheels. I used a 86 200x carrier & axle, then cut the stock 200x rear hubs down and made adaptors to fit the 3 bolt zinger rear wheels.
83 ATC 60-R Cr60 converted with Zinger parts.
83 ATC 70.
83 Tri zinger
ATC 85-R Cr85 engine on shortened 86-R frame.
ATC450AF
86 310-R Drag racer
440 snowmobile powered custom built.
87 Cr 500 Converted to Drag racer
Power User
Got the holeshot
that is really nice build jason! ive never seen that one,you have alot of hours on constructing that trike. do you still have that blue one i've seen at trikefest?
1985 With "86" Plastic's,Custom 12" Alluminum Extended Swing Arm,39MM PWK,"TRX" Filter,9 Paddle TALLER HALLER'S on 11" Wide Rim's,LOT'S of Stainless,LOT'S of Alluminum,LOT'S of PowderCoating,NOTHING Stock..
FASTEST Tri-Z on The Planet...MAKE A NOTE !! and the SECOND FASTEST, WRITE IT DOWN AGAIN!!!
Power User
Roostin Away
Yes, I have alot of time in the CR60 powered bike. I do still have the blue one from TF, It's a good little runner
83 ATC 60-R Cr60 converted with Zinger parts.
83 ATC 70.
83 Tri zinger
ATC 85-R Cr85 engine on shortened 86-R frame.
ATC450AF
86 310-R Drag racer
440 snowmobile powered custom built.
87 Cr 500 Converted to Drag racer
Loves Corn.
Catch me if you can
MOD it!BIG PIPE,,,,,BIG CARB.....carbon fiber reeds....
had a extra set of fenders... race cutMine RIPS.. but need some jets
Loves Corn.
Catch me if you can
going to cut these Z pegs off and weld them on the zinger pegs..zinger pegs suck! The plastic is still work in progress.. just scraped with a razor so far,,but in a hurry to finnish..So I Can woop up on some PA boys
Power User
Got the holeshot
Hey raffa you want to school me on the zingers at brapps ride? I just picked mine up from freaks, I got green blood, know nothing bout this little blue (yellow yami) thing.
MIK6 / Mike
TECATE RIDER, HASPIN SURVIVOR!!
Trikefest 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14 and beyond
RAFFAs Ice-fest 09, 10, 11, 13, 14, 15
Pensyltucky 09, 12, 13, 14, 15
New England Ride 4/13
Power User
Got the holeshot
cool pic's bryan! that carb is HUGE!what kind of jets do you need??
fits nice in the back of the rhino too...
FASTEST Tri-Z on The Planet...MAKE A NOTE !! and the SECOND FASTEST, WRITE IT DOWN AGAIN!!!
Reply With Quote
