I know the stock is 22x11x8... but they look so tall and old school. I see most people running smaller tires that look flat across the top; not ballooned out like the old ones.
What size(s) is/are everyone running?
At The Back Of The Pack
Arm chair racerAt the back of the pack
I know the stock is 22x11x8... but they look so tall and old school. I see most people running smaller tires that look flat across the top; not ballooned out like the old ones.
What size(s) is/are everyone running?
At The Back Of The Pack
Arm chair racerAt the back of the pack
IMO, a good set of 20" tires is a good choice for all-around riding, size-wise.
The Holeshot type pattern works fairly well for me.
One piece at a time. Status: The Beast is Done..06-23-07
Back in the saddle again
Currently owned rides:
My sleds, and.........
1995 CBR600F3
1976 Kaw 400 triple-smoker......SOLD
1986 250R...owned since 1990
06-23-07........the R is finally done!!!
ESR pipe, Aktive reeds/CR cage, 38mm PWK, +4 Dominator
mild clean-up porting, an open K&N, CR and YZ calipers.......among other things
New to the board
Arm chair racerNew to the board
I have 18's and am going to switch to 20's. From posts on this topic, seems most agree that 18's are good for the track and sliding but the 20's are a better all around tire.
Got The Holeshot
Arm chair racerJust too addicted
My 250r and 350x have 20x11x9 both on ITP rims.
Tpc 450
86 250r
86 350x
86 200x
86 250sx
85 225DR
(2) 84 YTM
(3) 85 Atc 70
At The Back Of The Pack
Arm chair racerAt the back of the pack
So 20" tall is good for all-around riding? I have stock size (wider offset) wheels so that should work out nicely.
Reply With Quote
