At The Back Of The Pack
Arm chair racerAt the back of the pack
this may have been mintion before but has inyone ever tried to put brake lights on a atc? i was thinking it couldnt be hard if you used the parts of a newr 4 wheeler with brake lights. if inyone has iny ideas or has done this let me know i have been thinking bout trying it.
3 wheelers
1983 200x flat tracker
1983 200x almost original
1983 200e bigred parting out
let me know what parts you need
At The Back Of The Pack
Arm chair racerFirst time rider
its pretty simple to do. its just a couple of switches. A brake switch that has a button in it off of a street bike for the front.
for the rear foot brake, theres 2 ways i know of. one is to mount a brake switch on the lever like most quads. the other way is to buy a pressure switch (if you have hydrolic disk brakes) and mount it in the brake line.
-Phil
Rides:
1985 ATC110
1983 ATC70
198? ATC200X (sold for $300) (bought back for $50)
1984 200M
Past Rides:
1981 ATC250R (sold for $700)
2003 Arctic Cat 500 4x4 Automatic (sold for $1000 + a 87 TRX250 Fourtrax)
1987 TRX250 Fourtrax (sold for $600)
1978 ATC90 (sold for $75)
Many Many Other 90 and 110s
198? Tri Moto 125
And several other misc, other trikes.
At The Back Of The Pack
Arm chair racerAt the back of the pack
ya i was thinking if u bought all the parts for like a 450r the breaks it would be easy but i didnt know how they worked exactly i know the switchs but idk if thy r seprate wiring or are they part of the wiring harness
3 wheelers
1983 200x flat tracker
1983 200x almost original
1983 200e bigred parting out
let me know what parts you need
Reply With Quote