Shock rebuild suggestions?

[dgpilot15]

I really dig the White power racing shock. It needs a complete overhaul though. The remote resevoir line has rotted away and leaked out the nitrogen and the polyurethane bump stop disintegrated. I can clean it up, powdercoat the spring and have the remote can re-anodized myself but can any of you referr me to a shop that can do a good assembly and recharge? No one out here locally wants to touch it.

[MTS]

I can rebuild them, quite simple, the difficult part is finding all the seals and piston rings required, to do so, it might be an odd ball shaft size ect, and hopefully the shaft is not bent, or the chrome wore off, if so it can be re-plated for about 200$ and straighten if its not to to bad, i may to a write up on it for the forums in the near future,

[dgpilot15]

Heven't disassembled yet but am relatively sure the shaft is still straight. chrome is good too. no oil leaking down the shaft, just no gas. shock is all rebound, no dampening.

[dcreel]

White Bros. used to sell the WP suspension for bikes. Maybe they could rebuild it.

[dgpilot15]

Well, the tear down has begun. As Walt Disney so aptly claims, "It be too late to alter course mateys!"

[brapp]

sent it to reactive suspensin it belive its 65 bucks plus parts and he is bigtime into the vintage mx and will most likely have allthe stuff to do it in stock and excelent turn around. 610-367-1700 he is abotu th enly erson i woudl trust liek this and have been dealing with him for years! just when you call say josh marshall mentioned him and hel give ya a good deal.

[dgpilot15]

Cool Braap. Thanks!

[sblt500r]

i rebuild shocks. i ussually charge $130 to rebuild the stock rear shocks shipped. includes parts. parts for a showa shock are about $70 not sure what wp parts cost, but you can buy them.